Download
Share
Print this page
Caple WDI3310 Instruction Manual
  1. Manuals
  2. Brands
  3. Caple Manuals
  4. Washer/Dryer
  5. WDI3310
  6. Instruction manual
Caple WDI3310 Instruction Manual

Caple WDI3310 Instruction Manual

Integrated washer dryer
Hide thumbs

Advertisement

Quick Links

Download this manual
I n t e g r a t e d W a s h e r D r y e r
I n s t r u c t i o n M a n u a l
WDI3 310
Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk

Advertisement

loading
Need help?

Need help?

Do you have a question about the WDI3310 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Caple WDI3310

Summary of Contents for Caple WDI3310

  • Page 1 I n t e g r a t e d W a s h e r D r y e r I n s t r u c t i o n M a n u a l WDI3 310 Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk...

  • Page 2: Table Of Contents

    Overview of Washer Dryer Installation Installation Details Quick User Guide Detergent Drawer Control Panel Using Your Washing Machine Operation Programme Table Table Of Programmes Cleaning And Maintenance Troubleshooting Caple Contact Details Instruction manual WDi3301 Please keep this instruction manual for future reference...

  • Page 3: Warnings

    - Do not install your machine on a carpet or a surface that would prevent the ventilation of its base. - Call the Caple service centre for a replacement if the power cord malfunctions. - Use only the new water inlet hose thats is provided with your machine when connecting to water supply.
  • Page 4 - Your machine is designed for use in a domestic environment. The warranty will be invalid if you use it for commercial purposes. - This appliance is not intended for use by persons [including children] with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 5 Keep kids and pets far away from the machine during the operation. - DO NOT use the washer dryer if you suspect that it is damaged in any way. Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause serious injury.
  • Page 6 - It is important to clean fluff from the window of the dryer and around the door seal after each drying cycle. Failure to do so could result in water leaking. I N S T A L L A T I O N W A R N I N G S - The washer dryer must be installed by a Registered Installer.
  • Page 7 - Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. V E N T I L A T I O N W A R N I N G - Install the rear of the appliance close to a wall or vertical surface.
  • Page 8 L A U N D R Y W A R N I N G S - Before using for the first, the product shall be calibrated. - Before washing the clothes at first time, the product shall be operated in one round of the whole procedures without the clothes inside.
  • Page 9 - It is forbidden to wash carpets. - Glass fibre curtains should NEVER be put in this machine. - Skin irritation may occur if other garments are contaminated with glass fibres. - Foam rubber materials can, under certain circumstances, when heated become ignited by spontaneous combustion.
  • Page 10 - WARNING: Never stop the machine before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. - Do not lean on the door when loading the machine or use the door to lift or move the machine.
  • Page 11 E L E C T R I C A L W A R N I N G S - Do not plug the machine in and switch it on at the mains until the installation is completed. - The technical details [supply voltage and power input] are indicated on the product rating plate.
  • Page 12 - Make sure that the electrical system is earthed, complies with all applicable law and that the [electricity] socket is compatible with the plug of the appliance. Otherwise, seek qualified professional assistance. - The plug should be accessible for disconnection after the appliance has been installed.

  • Page 13: Environmental Protection

    [placed on the inside of the appliance storage drawer]. Registration can also be completed online by visiting www.caple.co.uk. Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase.

  • Page 14: Technical Specification

    T E C H N I C A L S P E C I F I C A T I O N Operating voltage / frequency [220-240] V~/50Hz [V/Hz] Total current [A] Maximum: 1 Mpa Water pressure [Mpa] Minimum : 0. 1 Mpa 1850 Total power [W] Maximum washing capacity [dry laundry] [kg]...

  • Page 15: Overview Of Washer Dryer

    OVERVIEW OF WASHING MACHINE O V E R V I E W O F W A S H E R D RY E R Drain Hose 1. Electronic Display Drain Hose 2. Programme Dial Plastic Drain Hose Holder: (Do not remove the holder;...

  • Page 16: Installation

    Plastic Drain Hose Holder: (Do not Plastic Drain Hose Holder: (Do not Plastic Drain Hose Holder: (Do not Plastic Drain Hose Holder: (Do not remove the holder; the operation of the remove the holder; the operation of the remove the holder; the operation of the remove the holder;...
  • Page 17 Adjusting Adjustable Stays Adjusting the Feet / A D J U S T I N G T H E F E E T / A D J U S T I N G A D J U S TA B L E S TAYS Adjusting Adjustable Stays 1.
  • Page 18 E L E C T R I C A L C O N N E C T I O N › Your Washing Machine requires a 220 - 240V, 50 mains supply. › The mains cord of your washing machine is equipped with an earthed plug. This plug should always be inserted to an earthed socket of 10 amps.

  • Page 19: Water Inlet Hose Connection

    with low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted. Water Inlet Hose Connection W AT E R I N L E T H O S E C O N N E C T I O N 3/4”...

  • Page 20: Water Discharge Connection

    water per minute will flow through a fully The water drain hose must be installed at a maximum height of 100 cm from the supply using the supplied new fill hose. Old connections, carefully turn the water Programme Dial: Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded dial to select the wa Water Discharge Connection...

  • Page 21: Installation Details

    I N S T A L L A T I O N D E T A I L S D I M E N S I O N S I N S TA L L AT I O N A C C E S S O R I E S Magnet block Counter Magnet Disk Hinge...
  • Page 22 Measure and test fit the plinth* [*] ensure the plinth can be removed by the user to clean the filter Measure and test fit the plinth* Dimension varies based on installation [Max. 150mm] Dimension varies based on installation (Max. 150mm) Dimension varies based on installation (Max.
  • Page 23 Line the door template up and use it to drill the hinge locations. Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 24 I F T H E C A B I N E T D O O R O P E N S TO T H E L E F T 24 Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 25 The appliance is designed with magnetic closure of the door. To enable correct operation of this device, it is necessary to screw the IF THE CABINET DOOR OPENS TO THE LEFT counter-magnet into the inner side of the door. Hinges are to be fixed to the door by hand N OT E Hinges are to be fixed to the door by hand only.
  • Page 26 I F T H E C A B I N E T D O O R O P E N S TO T H E R I G H T 26 Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 27 IF THE CABINET DOOR OPENS TO THE RIGHT Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 28 Insert the hinges into the furniture door and use the two wood screws to fix in place. Insert the hinges into the furniture door and use the two wood screws to fix in place. 16 - 22mm 36.5mm door thickness between 16 - 22mm door thickness between 16 - 22mm 28 Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 29 Mount the door on the appliance using the hinges and 2 machine thread screws (2 per hinge, 4 in total) Mount the door on the appliance using the hinges and 2 machine thread screws [2 per hinge, 4 in total] N OT E : It is recommended to use a powered screwdriver.
  • Page 30 Mount the two door magnet blocks, using the final 2 machine thread screws [1 per magnet block] 30 Instruction manual WDi3301 Please keep this instruction manual for future reference...
  • Page 31 Finally fit the kitchen plinth ensuring that you allow easy access to the filter to allow the user to clean the filter. Instruction manual WDi3301 Please keep this instruction manual for future reference...

  • Page 32: Quick User Guide

    U S E R G U I D E Q U I C K U S E R G U I D E I M P O R TA N T: Only “machine dryable” labelled ( ) clothes can › Only “machine dryable” labelled clothes can be dried in your machine.
  • Page 33 3. Add softener and detergent. 4. Start your machine by pressing the Start/Pause button. pressing the CARE AND CLEANING INSTR C A R E A N D C L E A N I N G I N S T R U C T I O N S The filter located The filter located at the at the water inlet...
  • Page 34 NING INSTRUCTIONS ANING INSTRUCTIONS The Water inlet hose filter The Water inlet should be cleaned every two months. hose filter The Pump filter hose filter The Pump filter should be cleaned every two months. should be The Pump filter cleaned every two months.

  • Page 35: Detergent Drawer

    D E T E R G E N T D R A W E R Pre-Wash Detergent Compartment: 1. This compartment should be used only when the pre-wash feature is selected. We recommend that the pre-wash feature is used only for very dirty laundry.
  • Page 36 This compartment is for liquid or powder This compartment is for liquid or powder detergents or limescale remover. The fluid detergents or limescale remover. The fluid detergent level plate will be supplied inside detergent level plate will be supplied inside your machine.

  • Page 37: Control Panel

    C O N T R O L PA N E L P R O G R A M M E D I A L : cotton wash & dry eco 40-60 quick wash & dry cotton ˚ cotton dry cotton 20 time start / temp.

  • Page 38: Using Your Washing Machine

    U S I N G Y O U R W A S H I N G M A C H I N E Preparing Your Laundry P R E PA R I N G YO U R L A U N D RY 1.
  • Page 39 ！ WA R N I N G : Any malfunctions which occur due to foreign materials damaging your machine are not covered by the warranty. 1. Close zips and fasten any hooks and eyes. 2. Remove the metallic or plastic hooks off curtains or place them in a washing net or bag. 3.
  • Page 40 Dry cleaning in gas oil, Perchlorinetyhlene Make sure the door is and R113 is otherwise the program P U T T I N G L A U N D RY I N T H E M A C H I N E 6.2 Putting Laundry in the Machine Adding Detergent to The amount of detergent y...
  • Page 41 Load each item of laundry separately. Check that no items of laundry are › Load each item of laundry separately. › Check that no items of laundry are trapped between the rubber seal and the door. Gently push the door until it clicks shut. ›...

  • Page 42: Operation

    do this, slide the fluid detergent level plate (*) into the guides in compartment II of the detergent drawer. Use the lines on the plate as a guide to fill the drawer to the required level. (*) Specifications may vary depending on the machine purchased.

  • Page 43: Spin Speed Selection

    When you select a programme the maximum temperature for that programme is automatically selected. To adjust the temperature, press the water temperature adjustment button until the . This desired temperature is displayed on the digital display. You can gradually decrease the washing water temperature between the maximum wash water temperature of the selected programme and cold washing [- - C].

  • Page 44: Delay Timer

    Delay Timer DELAY TIMER y Timer selection : Delay Timer Delay Timer sele can use this auxiliary function to delay To select this feature pres tart time of the washing cycle for 1 to You can use this auxiliary function to delay the start time of the washing cycle for 1 to 23 hours . se the delay function: You can use this auxiliary function to delay To select this fe...
  • Page 45 selection : TIME DRY SELECTION To select this feature press “time dry”. If you continue pressing, duration options [0:30, 0:60, 0:90, 120 minutes] will be displayed. You can select the drying duration you want for your cycle. To select this feature press "time dry". N OT E : If one of the 30’...
  • Page 46 Dry option selection: DRY OPTION SELECTION: By pressing the "Dry option” key, you can use this drying function for the laundry you wish to dry after washing. If you want to enable this function, you should press the drying level key after the program you have selected.
  • Page 47 DRYING OPTION SELECTION: S E L E C TA B L E / FA C TO RY P R O G R A M M E D RY I N G P R O F I L E S E L E C TA B L E O P T I O N S N OT S E L E C TA B L E P R E S E T Eco 40-60...

  • Page 48: Start/Pause Button

    Turn the programme dial to th “STOP” position. Your machine will stop the wa Cancelling the Programme operation and the programme START/PAUSE BUTTON Turn the programme dial to an Turn the programme dial to the programme to drain the mach “STOP”...

  • Page 49: Cancelling The Programme

    Turn the programme dial to the “STOP” position. Your machine will stop the washing operation and the programme will be Turn the programme dial to any other CANCELLING THE PROGRAMME programme to drain the machine. Your machine will perform the To cancel a running programme at any time: necessary draining operation and 1.

  • Page 50: Programme Table

    Cotton 20°C 40°*, 60° 60°*, 90°, 80°, 70°, 60°, 40° 20°* Delay Timer select Delay Timer (°C) Delay Timer selection : P R O G R A M M E T A B L E 40°*, 30°, 40°*, 30°, 30°*, (Cold wash) 40°*, 30°, 30°*, (Cold wash) 40°*, 30°, (Cold wash)
  • Page 51 P R O G R A M M E R I N S E A L L E R G Y S A F E S P I N / D R A I N Delay Timer select Delay Timer Delay Timer selection : Selectable washing...
  • Page 52 Delay Timer sele Delay Timer Delay Timer selection : P R O G R A M M E C OT TO N D RY Q U I C K W A S H & D RY C OT TO N W A S H & D RY 40°*, 30°, 30°*, (Cold wash) 40°*, 30°,...
  • Page 53 › For household washer-dryers; the wash and dry cycle is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle,and to dry it in such a way that it can be immediately stored in a cupboard, and that this programme is used to assess the compliance with the EU ecodesign legislation.

  • Page 54: Table Of Programmes

    T A B L E O F P R O G R A M M E S Water Max. Remaining Energy Consumption Programme Duration Consumption Temperature Moisture Content kWh/cycle Hours:Minutes Litres/Cycle °C % 1400 Rpm 2,49 03:10 02:25 0,760 0,380 0,220 03:28 02:42...
  • Page 55 2 minutes after the completion of a of a wash cycle. › The installation and repairing procedures should always carried out by the Authorised Caple Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

  • Page 56: Cleaning And Maintenance

    C L E A N I N G A N D M A I N T E N A N C E ！ WA R N I N G : Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
  • Page 57 ！ C AU T I O N : The filters at the water inlet valve may become clogged due to water quality or lack of required maintenance and may break down. This may cause a water leak. Any such breakdowns are out of the scope of the warranty.
  • Page 58 the Built-in Installation Manual instructions. The use of detergent may cause residual build up in the detergent drawer over time. We recommend that you remove accumulated residue. D E T E R G E N T D R A W E R The use of detergent may cause residual build up in the detergent drawer over time.
  • Page 59 B O DY / D R U M 1. Body Use a mild, non-abrasive cleaning agent, Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth. casing. Wipe dry with a soft cloth. 2.

  • Page 60: Troubleshooting

    › Unplug your machine from the mains power supply. › Turn off the water supply and contact Caple Service, tel 0117 938 7420 FA U LT P O S S I B L E C A U S E...
  • Page 61 FA U LT P O S S I B L E C A U S E T R O U B L E S H O OT I N G As soon as the machine The end of water drain hose is too low for is loaded with Check that the drain hose is at a suitable height.
  • Page 62 C O D E Shut the door properly until you hear a click. If your machine persists The door of your machine is not to indicate fault, turn off your machine, unplug it and contact Caple shut properly. Service immediately.
  • Page 63 Instruction manual WDi3301 Please keep this instruction manual for future reference...

  • Page 64: Caple Contact Details

    Caple Service Fourth Way Avonmouth T: 0117 938 1900 Bristol E: service@caple.co.uk BS11 8DW www.caple.co.uk...