Pioneer AVIC N1 - Navigation System With DVD player Installation Manual page 9

30-pin cable (supplied)
3 m
EXTENSION port
Not used.
Display unit
Yellow
G.SP (Guidance speaker output)
This is not used normally.
When combining this unit with
Pioneer multi-channel processor
(sold separately) that is compatible
with this unit, G.SP will be used to
output the guidance voice.
In this case, the Pioneer external
speaker (e.g. CD-TS37GP) (sold
separately) must be connected to
the SP-OUT jack (2.5 ø MINI JACK,
1W max [16 Ω]).
For details, see the operation manual
of the external speaker.
Note:
When Pioneer multi-channel processor (sold separately) is
connected to this unit, make sure the "5.1 CH" mode is acti-
vated. Please find the correct setting by referring to
"Switching the 5.1ch setting" in the "Operation Manual" of
the navigation system.
WIRED
REMOTE
Please see the Instruction
Manual for the Wired Remote
Control (sold separately).
MIC INPUT
The microphone in the voice
recognition kit (e.g. CD-VC1)
(sold separately) is connected
when the voice recognition
function is used.
Power cord
DIGITAL OUT
This is used when connecting
to the Pioneer multi-channel
processor (sold separately),
that is compatible with this unit.
Otherwise this is not used.
8