Sound Controls; Audio Modes - Panasonic CQ-5800U - Double DIN Heavy Duty MP3 Operating Instructions Manual

Sound Controls

SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press [SQ] for more than 2 seconds to select the sound type as
follows:
Audio Modes (Bass/Treble/Balance/Fader)
1
Push [SEL] to select the audio mode.
(Setting Range: 0 to 40, Default: 18)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: 15 levels each and 0 (center),
Default: CNT)
(Setting Range: 15 levels each and 0 (center),
Default: CNT)
(FLAT) flat frequency response:
does not emphasize any part.
(default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
SQ indicator
2
Turn [VOL] (volume) clockwise or counter-
clockwise to change each level.
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
Note: If no operation takes place for more than 5 seconds in audio
mode (2 seconds in volume mode), the display returns to the regular
mode.
q: Up
w: Down
q: Increased
w: Decreased
q: Increased
w: Decreased
q: Right enhanced
w: Left enhanced
q: Front enhanced
w: Rear enhanced
CQ-5800U
11