Factory Reset - Hozelock Select Plus Quick Start Manual

To delete a program
1 :
Delete a program (P1,P2 or P3)
Press the dial (short press). Rotate dial until
the program icons are flashing together.
2 : Select the program to delete
Press the dial (short press). Rotate dial until
the program you want to delete is flashing.
3 :
Hold the water now button
When the P icon is flashing hold down the
Water Now button for 3 seconds and release.
The data has now been deleted.
PROGRAM DATA IS DELETED

Factory Reset

1 : Perform a full reset of the timer
Press the dial and Water Now
+
button down together for 8
seconds and release.
2 : Confirm full reset
Press the dial to confirm YES or rotate
the dial to NO and quit.
3 : All data is deleted
All data has been deleted. You must now set up
your timer again to start using it. Refer to "Set up
- first use" section.
This product is not designed to be used
in sub-zero (frost) temperatures. During
winter months drain any remaining
water out of your timer and bring it
indoors until the next watering season.
Remove the batteries from the front
panel if you do not intend to use it for
long periods.