First use
1 : Set the clock
Press to set the clock time. Rotate the dial and
press to confirm the hours and minutes.
2 : Set today's day
Rotate the dial to select the day then press the
dial to confirm.
3 : Choose watering days
Rotate and press to toggle days on and off.
Rotate dial to the right to finish.
4 : Set the START TIMES
Rotate and press the dial to Select a
program. Turn ON the programs to run them
automatically on the days you have chosen
in step 3.
Use the Water Now button to go back a step
if you make a error.
To Water Now
1
: Press the Water Now button
Press the Water Now button once (short press).
Adjust the minutes and press dial to confirm.
2 :
To CANCEL a Water Now
Press the Water Now button or the dial
(short press) to cancel watering at any
time.
Set a RAIN DELAY
1 :
Set a RAIN DELAY (pause)
Hold down the dial for 3 seconds. You
can now set the number of days to pause
watering (max 7 days).
Cancelled days are shown with a large umbrella
above them. Press the dial to confirm.
2 : Cancel a RAIN DELAY
Hold down the dial for 3 seconds then
rotate the dial to "OFF". Press the dial
to confirm.
Turn OFF the timer
1 : Turn the timer OFF
Hold down the button for 3 sec to turn
off the timer. All watering will stop.
Note: You can perform a Water Now
when the timer is OFF.
2 : Turn the timer ON
Hold down the button for 3 sec to turn
the timer back on again.
All your set programs are stored in the
timers memory and will continue to
run again.
Adjust your settings
1 : To adjust your settings
Press the dial (short press). Rotate dial and
select the setting you want to change.
Press
to quit when done.
Need help?
Do you have a question about the Select Plus and is the answer not in the manual?