Advanced Timer Recording; Manually Programming Timer Recording - Panasonic DMR-XS350 Operating Instructions Manual

Advanced timer recording

Manually programming timer recording

Timer recording of the broadcast
Recording disc: [HDD]
Recording mode: DR
Timer recording from the external equipment connected to AV1, AV2
or AV3
Recording disc: [HDD]
Recording mode: XP, SP, LP, EP, FR
Selection of channel is made easy by creating a Favourite of the
channels you watch often. ( 83, Favourites Edit)
≥You can enter up to 64 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥Turn on this unit.
≥Make sure that the clock settings are correct (
1
Press [PROG/CHECK].
Timer Recording HDD 30:30 DR FRI 23.01.2009 8:59
Channel Name Schedule
Drive/Mode
New Timer Programme
Total 0/64 Delete
DEL
OK
Turn
RETURN
Timer Off
2
Press [3, 4] to select "New Timer
Programme" and press [OK].
3
Press [2, 1] to select the items and
change the items with [3, 4].
Timer Recording HDD 30:24 DR SAT 10.01 2009 19:10
All DVB Channels
Channel Day/Date Start Stop Drive Mode
1 SAT 10.01 23:10 -- HDD DR
[Prog.Name]
Input Name
ZDF
Category/ Date/
RETURN
AV Weekly
≥Channel
Select the channel to record.
You can press the "Red" button (Category/AV) to change
"AV input", "All DVB Channels", "Free Channels", "Radio" or
"Favourites1", etc.
You can perform this operation when you select the box of
"Channel".
You can also select channel with the numbered buttons.
≥Day/Date
You can select current date up to one month later minus one
day. You can select "Date" or "Weekly" by pressing the
"Green" button only when "Day/Date" is selected. Titles
recorded using the same daily or weekly timer are bundled
and displayed as a "group" in the DIRECT NAVIGATOR
screen ( 39) except when using Auto Renewal Recording.
≥Start/Stop
Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 15-minute increments.
91).
Space
Page Up
CH
Page Down
Category/AV
≥Mode
Recording modes and recording contents (
"XP", "SP", "LP", "EP", "FR" can be selected when "Channel"
is selected in "AV input".
It will be fixed to DR mode if anything else is selected.
≥Renew (Auto Renewal Recording) (
≥Input Name
Press [OK]. ( 76, Entering text)
4
Press [OK].
The timer programme is stored and the timer icon (red) is
displayed.
Timer icon (red)
Timer Recording HDD 30:30 DR
Channel Name

ZDF
Hunter.\*Episode 5\*
New Timer Programme
Check for available space on HDD, etc., when the "!" is
displayed. ( 35)
"F" lights on the unit's display to indicate timer recording
standby has been activated.
To return to the previous screen
Press [RETURN ].
To exit the screen
Press [EXIT].
∫ Timer Recording using the TV Guide system
( 23)
∫ To release the unit from timer recording standby
( 34)
∫ To cancel recording when timer recording has
already begun ( 34)
∫ About 2 programmes recorded simultaneously
( 22)
∫ Notes on timer recording (
[Note]
≥To record an encrypted broadcast, a CAM (Conditional Access
Module) with Smart Card valid for the broadcast is required.
28)
34)
FRI 23.01.2009 8:59
Space
Schedule
Drive/Mode
FRI 27.03 HDD
OK
22:20 - 22:30 DR
35)
RQT9439
33