Advanced Timer Recording; Code; (Analogue Broadcast Only); Manually Programming Timer Recordings - Panasonic DMR-EZ48V Operating Instructions Manual

Advanced timer recording

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
≥You can enter up to 16 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+R]DL] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥Insert a disc or video cassette with enough remaining blank space
(➡ 14).
≥Make sure that the clock settings are correct (➡ 64).
Using G- system to make timer

CODE

recordings (Analogue broadcast only)
G-
CODE
Gemstar Development Corporation. The
G-
CODE
license from Gemstar Development
Corporation.
Entering G- numbers is an easy way of timer recording. You can
CODE
find these numbers in TV listings in newspapers and magazines.
1
Press [G-Code].
G-Code DVD 1:58 SP
Remain
Record VHS --:---- TUE 14.10.08. 12:54:00
Input G-Code Number 0-9, and press OK.
2
Press the numbered buttons to enter
the G- number.
CODE
Press [2] to move back to correct a digit.
3
Press [OK].
1:58 SP
Timer Remain DVD
Recording
--:---- TUE 14.10.08. 12:54:00
VHS
Name Date Start Stop Mode
Drive
SP
2A ARD 15. 10. WED 22:00 22:30 DVD
All Services : ARD
Programme Name
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] (➡ right, step 3).
≥When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.08 12:56:00
Drive
space
Stop Drive Mode
OK
20:00 DVD SP
Programme
Repeat steps 1–4 to programme other recordings.
Press [Í DVD/VHS] to turn the unit off.
is a registered trademark of
system is manufactured under
No. Name
&
01
ARD
Check to make sure "OK"
is displayed (➡ 30).
Manually programming timer
recordings
1
Press [PROG/CHECK].
2
Press [3, 4] to select "New Timer
Programme" and press [OK].
3
Press [1] to move through the items
and change the items with [3, 4].
≥When "Name" is selected, you can press the "Blue" button to
change the group [e.g., TV, Radio, Edit Favourites screen
(➡ 58)] and then press [3, 4] to select the channel you
want to record.
≥Press and hold [3, 4] to alter the Start (Start time) and
Stop (Finish time) in 30-minute increments.
≥You can also set Name (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
[.
Date: Current date up to one month later minus
l
one day
;:
l
Daily timer: SUN-SAT>MON-SAT>MON-FRI
l
;:
l
a.
Weekly timer: SUN>--->SAT
≥You can also press [DRIVE SELECT] to select the recording
drive.
≥You can also press [REC MODE] to change the recording
mode.
≥Programme Name
Press [2, 1] to select "Programme Name" and press [OK].
(➡ 46, Entering text)
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í DVD/VHS] to turn the unit off.
No. Name
&
01
ARD
RQT9127
29