HDD(s) Installation Unpacking the NVR The below description is taking HN35320400NR as an example. Note: Cut the carton carefully with a knife to open it. There are two NVRs inside the carton. Figure 1 Cut the Carton Take out the NVR. There are 2 EPEs, 1 accessory box and 1 NVR inside the gift box. Figure 2 Open the Gift Box Unwrap the NVR PE bag.
Install HDD(s) in NVR Install 1 or 2 HDDs The below description is taking HN35080200 as an example. Note: Take out 1 or 2 HDDs. Place 2 screws on each HDD as below. Lock these 2 screws loosely. Don’t tighten the 2 screws. Note: Figure 4 Lock Screws for HDD(s) Slide the HDD(s) gently in the NVR, making sure the 2 screws in step...
1. Remove the screws for fixing the upper cover and take off the cover. 2. Remove the screws for fixing the HDD bracket and take off the bracket. 3. Install the 4 HDDs on the bracket. Honeywell 35 Series NVR HDD Installation Guide...
4. Put the bracket back to the NVR and use screws to fix it. Plug the SATA and power connector. Install the upper cover back. Install 8 HDDs The below description is taking HN35640800DR as example. Note: Remove the NVR cover, then remove the screws below to take apart HDD bracket.
Page 12
Take apart the first HDD bracket. Honeywell 35 Series NVR HDD Installation Guide...
Page 13
Remove the 2 copper pillars, then follow step2 to take apart the second HDD bracket. Install HDDs to the 2 brackets. Pay attention to the HDD and bracket direction. Note:...
Page 14
Install the first bracket. Install the 2 copper pillars back, then install the second bracket. Honeywell 35 Series NVR HDD Installation Guide...
Page 15
Plugin the SATA & Power connectors, then fix the bracket.
Page 16
Install the NVR cover back. Honeywell 35 Series NVR HDD Installation Guide...
Format HDD(s) After installing the HDD(s), user needs to format the HDD(s) to use it for the first time. Format HDD(s) on NVR GUI. a) Log in to NVR, click on Storage. b) Select Disk to format the HDD(s). Figure 7 Format HDD(s) on NVR GUI Format HDD(s) on NVR webpage.
NVR with your PC with RJ45 cable. Figure 10 Connect the Power Line Check the firmware in the NVR. a) Log in to NVR GUI. b) Go to Setting > System > Information to check the NVR firmware version. Honeywell 35 Series NVR HDD Installation Guide...
Figure 11 Check the Firmware Version Update NVR Firmware There are two ways to update firmware (local or web site). You can choose one for your convenience. Check the latest firmware in Agile system. All models use the same firmware. Update Firmware via USB Drive Prepare a USB drive and format to FAT32.
Log in to the NVR via Web browser. Note: For the first login, you need to create a new password to activate the NVR Figure 14 Login the NVR Go to Setting > System > Maintenance > FW update. Honeywell 35 Series NVR HDD Installation Guide...
Figure 15 Firmware Update Select the correct NVR firmware, such as “HON_Honeywell_Series35_HN35XX0XXXX_1_HC1.22.1.42.20220420.bin”. Figure 16 Select the NVR Firmware After selecting the firmware, the upgrading will start automatically. The process may take several minutes.
Log in to the NVR. Go to Setting > System > Maintenance. Click on Reset and then select Restore to factory default. Click YES to reset NVR. Figure 18 Restore to Factory Default Honeywell 35 Series NVR HDD Installation Guide...
Check the Storage Capacity The below description is taking HN35080200 as an example. Note: Log in to the NVR. Go to Setting > Storage > Disk to check if the storage capacity is the same as the HDD installed in the NVR. Figure 19 Check Storage Capacity Reset the Unit The below description is taking HN35080200 as an example.
Figure 20 NVR Product Label Packaging NVR Gift Box Put the NVR back in the PE bag and wrap it. Figure 21 Put the NVR Back in the PE Bag Honeywell 35 Series NVR HDD Installation Guide...
Put the EPEs and accessory bag back. Don’t forget to put accessories into the accessory box. Note: Figure 22 Put the EPEs and Accessory Bag Put the NVR in the gift box. Figure 23 Put the NVR in the Gift Box Seal the Gift box.
Figure 26 Gift Box Label 2 c) Replace carton label Different HDD bundle has different weight. The actual weight needs to be weighed. The new carton labels should be printed with correct information to replace the old labels. Honeywell 35 Series NVR HDD Installation Guide...
Page 101
Parc de Haute Technologie Tel: +82-2-799-6114 3-7 rue Georges Besse 92160 Antony, France Honeywell Building Technologies – Security & Fire (Pacific) Tel: +33 (0) 1 40 96 20 50 Honeywell Ltd 9 Columbia Way Honeywell Building Technologies – Security Italia SpA...
Need help?
Do you have a question about the 35 Series and is the answer not in the manual?
Questions and answers