How To Make Detailed Settings; Menu Map - Denon AVR-A100 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
Items that only need to be set once
Set these for example upon purchase.
Once these items are set, there is no need to
set them again unless the speaker layout or the
connected speakers have been changed.
Setting items Detailed items
INFORMATION Status
Audio Input Signal
HDMI Information
Auto Surround Mode
Quick Select
Preset Channel
SOURCE SELECT Play
Auto Preset
Preset Skip
Displayed items of the
Parental Lock
"SOURCE SELECT" menu
Antenna Aiming
differs, depending on the
Preset Name
selected input source.
Input Assign
Video
Input Mode
Rename
Source Level
Playback Mode
Still Picture
SURROUND MODE
AUDIO/VIDEO ADJUST Audio Adjust
Picture Adjust
AUTO SETUP Audyssey Auto Setup
Parameter Check
MANUAL SETUP Speaker Setup
HDMI Setup
Audio Setup
Network Setup
Zone Setup
Option Setup
Language
Description
Shows information about current settings.
Shows information about audio input signals.
Displays the HDMI input/output signals and HDMI monitor information.
Displays the settings stored for the auto surround mode.
Displays the settings stored for the Quick Select function.
Shows information about tuner or network preset channels.
Displays the playback screen of each input source.
Uses the auto preset function to program radio stations.
Sets the preset memories that you do not want to display when tuning.
Sets the Parental Lock.
Adjusts the SIRIUS reception sensitivity.
Assigns name to a preset memory.
Changes input connector assignment.
Makes the video settings.
Sets the audio input mode and decode mode.
Changes the display name for this source.
Adjusts the playback level of the audio input.
Makes settings for iPod, USB memory device or network source playback.
Makes settings for still picture playback.
Selects a listening mode.
Adjusts various audio parameters.
Adjusts the picture quality.
Makes the optimum settings for the speakers being used automatically.
Checks Audyssey ® Auto Setup measurement results.
This item is only displayed after Audyssey Auto Setup procedure has been
performed.
Sets the speaker size and distance, the channel level, etc.
Makes settings for HDMI video/audio output.
Makes settings for audio playback.
Makes network settings.
Makes settings for audio playback in a multi-zone (ZONE2/ZONE3) system.
Makes various other settings.
Set the language for display the menu on the TV screen.
ENGLISH
Page
107
107
107
107
107
107
80
81
81
81
81
81
82
83
84
85
85
85
85
50
86
92
7
12
93
98
99
101
103
104
106
75