1. Manuals
  2. Brands
  3. GDC Manuals
  4. Projector Accessories
  5. Standalone Integrated Media Block SR-5400C
  6. User manual

GDC Standalone Integrated Media Block SR-5400C User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL FOR
SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™
Version 19.2
st
October 31
, 2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Standalone Integrated Media Block SR-5400C and is the answer not in the manual?

Questions and answers

Related Manuals for GDC Standalone Integrated Media Block SR-5400C

Summary of Contents for GDC Standalone Integrated Media Block SR-5400C

  • Page 1 USER MANUAL FOR SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ Version 19.2 October 31 , 2023...
  • Page 2 Schedule ......................29 Cue ......................... 30 5.3.1 Adding a new Cue ....................31 Input ....................... 35 Device ......................37 5.5.1 Creating a new Automation Device ..............38 GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 1 - October 31 , 2023...
  • Page 3 System Information .......................74 7.1.1.3 System Setting ......................75 7.1.1.4 Encrypt ...........................76 7.1.1.5 Storage ...........................77 7.1.1.6 Sensor ..........................78 7.1.1.7 Ethernet ..........................79 Playback ......................80 7.2.1 Audio Channel Mapping..................85 GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 2 - October 31 , 2023...
  • Page 4 System ......................97 Maintenance ....................103 7.5.1 Software Upgrade ....................104 OPERATION NOTES ................. 107 Power Up Sequence ..................107 Power Down Sequence ................107 GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 3 - October 31 , 2023...

  • Page 5: Copyright Notice

    The contents, features and specifications stated in this manual are subject to change without notice due to continuous product development and improvements. In no other event shall GDC Technology Limited be liable for any loss of profit or any other commercial damages, including but not limited to special, consequential, or other damages.
  • Page 6 CONTACTS AND OFFICES CONTACTS AND OFFICES Website Contact Us Worldwide Offices 24/7 Support GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 5 - October 31 , 2023...

  • Page 7: About This Manual

    1. INTRODUCTION 1 INTRODUCTION The SR-5400C Standalone Integrated Media Block™ from GDC is to be used with Christie CineLife+ Series Projector. The SR-5400C is capable of playing DCP content in 4K 3D and up to 4K@96 fps. 1.1 About This Manual...

  • Page 8: General Safety Instructions

    • You are cautioned that any change or modification not expressly approved in this manual or approved in writing by an authorized representative of GDC Technology could void your warranty and/or authority to operate the SR-5400C. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL...
  • Page 9 5. You can also select the preferred UI language by clicking on the corresponding flag icon, as indicated in Figure 2. Figure 2: Web UI Login screen GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 8 - October 31...

  • Page 10: Access Levels

    Configuration tabs. Technician Only System and Maintenance sub-tabs under Configuration menu are accessible) Dashboard, Playback, Automation, Content Maintenance and Configuration tabs. Figure 3: User Accounts GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 9 - October 31 , 2023...

  • Page 11: Recommended Web Browsers

    However, if the ‘Multi-user mode’ option is enabled (refer to Section 7.1); multiple users will be allowed to concurrently login to the Web UI. Figure 4: Single User Access GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 10 - October 31...
  • Page 12 [Network Information] network interfaces Displays all the licenses that are installed on the SR-5400C as well as the [Capabilities/Licenses] supported features or capabilities of the SR-5400C. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 11 - October 31 , 2023...
  • Page 13 Information section (refer to Section 7.1.1.2 for more details) Indicates the system date and time as per the timezone set on [Date and Time] the SR-5400C. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 12 - October 31 , 2023...
  • Page 14 To bring the Status bar back to its original position, click on the icon. [Logout] Logs out the current user from the SR-5400C Web UI. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 13 - October 31 , 2023...
  • Page 15 When playback is paused, the playback position within the clip can be changed by clicking on the current playback timecode. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 14 - October 31...
  • Page 16 The display shows the name of the active playlist, and the name of the clip currently being played. [Status Display] Information and errors encountered during playback will also be displayed here. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 15 - October 31 , 2023...
  • Page 17 If this icon is greyed out, it indicates that playback on the system has been stopped. Clicking on this icon will redirect the user to the Playback sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 16 - October 31...
  • Page 18 ’ button towards the right end of a clip, to remove it from ▬ [Playlist Editor] the playlist. Clips can be dragged and dropped within the playlist to change playback order. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 17 - October 31 , 2023...
  • Page 19 To use this feature, select a clip from the [Content List] and click on the button next to the clip name (displayed under the [Clip Information Display] section) to play the selected clip. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 18 - October 31 , 2023...
  • Page 20 Save the playlist currently being edited. [Reset] Reset any changes to the playlist currently being edited. [Load for playback] Load the selected playlist into the player for playback. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 19 - October 31 , 2023...
  • Page 21 Clicking on button against a particular clip in the playlist opens a pop-up window to edit CPL properties of the selected clip. Refer to Section 4.2.2 for details. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 20 - October 31...

  • Page 22: Edit Cpl Properties

    You can disable subtitles for the clip by selecting the Disable Subtitles checkbox. Subtitle Offsets (%) Set the Top, Right, Bottom Left values to adjust the position of the subtitles projected. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 21 - October 31 , 2023...
  • Page 23 To remove a cue from the list, click the – button against that particular cue. Save the changes to the CPL. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 22 - October 31 , 2023...
  • Page 24 Intermission playlist from the drop-down. Note: The Intermission playlist needs to be created and saved prior to adding the intermission to the feature CPL. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 23 - October 31 , 2023...
  • Page 25 Playback interface. Note: This button will remain disabled until the playlist is saved, by clicking on the Save button. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 24 - October 31 , 2023...
  • Page 26 Switch back to current day in month or week view. Displays the schedules of the previous or next day, week or month. [< Previous / > Next] GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 25 - October 31...
  • Page 27 [2]. Displays the details of the selected show. [Schedule Details] Note: Only the selected schedule details will be displayed here. Delete the selected schedule. [Delete] GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 26 - October 31 , 2023...
  • Page 28 This tab is used to set up automation and input triggers. Scheduling and manual triggering of automation cues can be done here. Figure 16: GDC Automation Workflow GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 27 - October 31...
  • Page 29 [Projector Quick Setup] Select the projector Primitive or Macro to be executed and click Execute button to send the command to the projector. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 28 - October 31 , 2023...
  • Page 30 Click Save to save the added schedule or click Discard to remove. [ – Remove Schedule] – Click to remove the selected scheduled automation cue. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 29 - October 31 , 2023...
  • Page 31 A pop-up window will be shown. Enter the name of the cue and click OK. [+Create] Refer to Section 5.3.1 for more details regarding adding a new automation cue. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 30 - October 31 , 2023...
  • Page 32 Figure 21: Adding a new cue Function Description Type in the name that needs to be assigned to the new cue being added & click on OK. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 31 - October 31...
  • Page 33 Device tab (Refer to Section 5.5 for more details) is ‘System’, the type will be ‘Primitive’ or If the selected Device Action ‘Switch Source’. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 32 - October 31 , 2023...
  • Page 34 (right section) based on the number of pins selected (left section). Click on the Save button to add the new cue or click Discard to remove. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 33 - October 31 , 2023...
  • Page 35 A new quick access button should be created under the Control sub-tab, as shown in Figure 23. Figure 23: Quick Access button for Automation Cue GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 34 - October 31 , 2023...
  • Page 36 ‘Coil’, ‘High to Low’ or Select a Trigger ‘Low to High’ for the selected device: GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 35 - October 31 , 2023...
  • Page 37 Click to reorder the input triggers using drag-and-drop. Click on the Save button to add the new input trigger or click Discard [Save]/[Discard] to remove. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 36 - October 31 , 2023...
  • Page 38 This is a list of configured automation devices on the SR-5400C. [Device] When a device is selected from the list, device details are displayed under the Details section. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 37 - October 31 , 2023...
  • Page 39 Figure 26: Adding a new Automation Device Function Name Description [Name] Type in the name that needs to be assigned to the new device being added. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 38 - October 31 , 2023...
  • Page 40 After adding the device name, assign the type of device you [Type] want to use. Select from a dropdown list as seen below: 5.5.1.1 When Device Type is ‘PROJECTOR’ Figure 27: Adding a Projector Device GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 39 - October 31 , 2023...
  • Page 41 Click on the Save button to add the new device or click Discard to remove. Click on the Delete button to delete the selected device. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 40 - October 31 , 2023...
  • Page 42 Timer delay to complete. Click on the Save button to save the configuration or click Discard [Save/Discard] to remove. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 41 - October 31 , 2023...
  • Page 43 [Import/Export Configuration] Export automatically saves the configuration file containing all automation cues to your web browser’s default download location. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 42 - October 31 , 2023...
  • Page 44 Issues List] under the selected category. The Filter option can be used to search for a particular clip based on the text entered. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 43 - October 31 , 2023...
  • Page 45 SR-5400C. It also displays Storage Usage [Storage] and Capacity. Click the Refresh button to update the displayed information. [Tasks Summary] Displays the summary of all content-related tasks on the SR-5400C. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 44 - October 31 , 2023...
  • Page 46 Primary as well as the Secondary storage. Content name displayed in Black indicates it is available only in the Primary storage. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 45 - October 31 , 2023...
  • Page 47 Delete the selected content from the SR-5400C storage. There are [Delete] two content delete options are available: ‘Immediately Delete’ & ‘Schedule Delete’. Refer to Section 6.2.3 for more details GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 46 - October 31 , 2023...
  • Page 48 Immediately Cache: The selected content will immediately be copied to the Secondary storage. The progress will be displayed under the Status tab. Schedule Cache: Please note that this feature will be made available in future releases. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 47 - October 31...

  • Page 49: Checking Content Integrity

    To verify the integrity of a package or CPL, go to the Package t a b a n d select the checkbox against the package or CPL that needs to be verified. The PKL/CPL details will be displayed under the Details section on the right. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 48 - October 31 , 2023...
  • Page 50 Immediately Verify: Immediate full verification of the selected CPL/PKL. The Verification status will be displayed under the Status tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 49 - October 31 , 2023...
  • Page 51 The scheduled verification will be displayed under the Schedule tab, as shown below. To delete this schedule, click on the Delete button. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 50 - October 31 , 2023...

  • Page 52: Deleting Content

    Note: If there is an error in the selected package, it will indicate ‘ Failed’ under the Status column. 6.2.3 Deleting Content Figure 34: Content Deletion options GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 51 - October 31...
  • Page 53 Provide a Name for the schedule being created. Select the Frequency Time for the schedule GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 52 - October 31 , 2023...
  • Page 54 The scheduled deletion will be displayed under the Schedule tab, as shown below. To delete this schedule, click on the Delete button. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 53 - October 31 , 2023...
  • Page 55 When the status displays ‘Not in SM”, click the Sync button to synchronize the [Sync] KDM to the SM. [Verify] Verify the selected KDM. The verification status will be displayed under the Status tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 54 - October 31 , 2023...
  • Page 56 Upload KDM files directly using the Web UI. A pop-up window is shown. Click on the Choose file button to select the KDM file(s) from the folder where it has been downloaded and click on Open. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 55 - October 31 , 2023...
  • Page 57 Verify that the LDM is valid. Any errors found will be displayed. [Verify] The Verification status will be displayed under the Status tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 56 - October 31 , 2023...
  • Page 58 The Source sub-tab is used to configure and manage the content ingest sources on the SR-5400C. There are two options available under this sub-tab: Ingest and Manage. Figure 37: Content → Source options GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 57 - October 31...
  • Page 59 [Refresh] Displays the list of content for Live Play [Live Source] (Refer to Section 6.5.1.3 for details.) GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 58 - October 31 , 2023...

  • Page 60: Ingesting Content From Usb Disk

    Select the drive partition assigned to the USB Disk by the SR-5400C from the drop-down Click to mount the content ingest source and select the content to be ingested. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 59 - October 31 , 2023...
  • Page 61 PKL/CPL list. You can select multiple PKL’s or CPL’s. Information about the selected package or CPL, including the file size, is shown in the section below the PKL/CPL list. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 60 - October 31...
  • Page 62 You can monitor the progress of ingest from the Status tab. Refer to Section 6.7 from more details about the Status tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 61 - October 31...

  • Page 63: Ingesting Kdms

    You can also select multiple KDMs. Information about the selected KDM, including Needed by CPL & Stated Validity are shown in this section. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 62 - October 31 , 2023...
  • Page 64 Note: As mentioned in Section 6.3, KDM files can also be directly from the Web UI using the Upload option under the KDM sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 63 - October 31 , 2023...
  • Page 65 Live Source button under the Ingest or Manage screen. A Live Play source can be unmounted by clicking on the button shown alongside the listed source. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 64 - October 31 , 2023...
  • Page 66 +Create to add a new content ingest source. [+Create] Fill in the details for the content ingest source and click Save to save the changes. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 65 - October 31 , 2023...
  • Page 67 (Refer to Section 6.5.1.3 for details.) [Delete] Click Delete to delete the selected content ingest source. Note: Delete Edit buttons only available on Created Sources GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 66 - October 31 , 2023...
  • Page 68 An FTP ingest source for screen-to-screen transfer can be added from the Manage screen, by following the steps depicted in Figure 44: Creating an FTP Ingest Source GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 67 - October 31...
  • Page 69 Displays a list of scheduled content ingest tasks. [Schedule] [Refresh] Click Refresh to refresh the list of schedules. [Delete] Click Delete to delete a selected schedule. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 68 - October 31 , 2023...
  • Page 70 [Delete] Click Delete to cancel the selected task. Click Clear History to clear all the finished tasks from the displayed list. [Clear History] GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 69 - October 31 , 2023...
  • Page 71 The configuration tab is used to change SR-5400C settings and configure aspects of SR-5400C operation. SR-5400C configuration consists of five categories: General, Playback, Storage, System and Maintenance Figure 47: Configuration options GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 70 - October 31 , 2023...
  • Page 72 Enabling this option allows multiple users to concurrently log in to Multi-user mode the Web UI. Note: Multi-user mode may not cater to all conditions. Users are advised to use this feature with care. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 71 - October 31 , 2023...

  • Page 73: Snmp Configuration

    A SNMP configuration pop-up window is shown with the following sections: General, System Information, System Setting, Encrypt, Storage, Sensors, and Ethernet. Clicking on each section will expand it. 7.1.1.1 General Figure 49: SNMP Configuration → General GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 72 - October 31 , 2023...
  • Page 74 Note: When Trap is On, a trap is sent when the SNMP Agent is stopped. Enable or disable SNMP monitoring and reporting. [Enable SNMP Service] Click Save to save the settings or Close to cancel the changes. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 73 - October 31 , 2023...

  • Page 75: System Information

    SNMP information is queried. The contact details of the Cinema where the server is installed. This [Contact Details] value will be displayed when SNMP information is queried. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 74 - October 31 , 2023...

  • Page 76: System Setting

    CPL without a valid KDM [Dropped Frame Threshold] Set a threshold limit based on the number of frames dropped in the specified time period (in seconds). GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 75 - October 31 , 2023...
  • Page 77 The default Password can be changed using the Change button. [Enable Authentication] Note: The new password should be alphanumeric and 8 to 64 characters long. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 76 - October 31 , 2023...
  • Page 78 Trap. [Mount Data Storage] Note: When Trap is On, a trap will be sent if the data storage is not mounted on the system. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 77 - October 31 , 2023...
  • Page 79 [Low Battery Voltage] Note: When Trap is On, a trap is sent if the IMB battery voltage falls below the minimum voltage limit. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 78 - October 31 , 2023...
  • Page 80 Ethernet 2 network interface is down. Enables sending an SNMP trap if the system detects that the IMB [Monitor IMB Ethernet 1] Ethernet 1 network interface is down. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 79 - October 31 , 2023...
  • Page 81 Enabling this option resets LTC to 0 at end of each CPL. Unload playlist at end of Enabling this option automatically unloads the SPL at the end of playback playback. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 80 - October 31 , 2023...
  • Page 82 This drop-down provides the following subtitle rendering options for Subtitle standard: subtitle overlay: • Auto • SMPTE 428-7 • Legacy Figure 57: Configuration → Playback (2) GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 81 - October 31 , 2023...
  • Page 83 Activate transmission of playback time-code over UDP. transmission Receiver IP Enter the IP of the receiver of time-code transmission of UDP. Transmission interval Indicates the time interval between transmissions GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 82 - October 31 , 2023...
  • Page 84 Use the audio channel mapping interface to map content audio channels to different audio output channels. Refer to Section 7.2.1 for details related to Audio Channel Mapping. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 83 - October 31 , 2023...
  • Page 85 Cinema Processor, such as the CP850. A ® valid license is required to enable Dolby Atmos support on the SR-5400C. For more details, please contact GDC Technical Support. • If APX (External) is selected; the SR-5400C can be configured to decode IAB content via an external Barco ®...

  • Page 86: Audio Channel Mapping

    The preset for the number of audio channels in the audio track can be changed here. Use the Preset button to configure audio presets. Refer to Section 7.2.1.1 for details GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 85 - October 31 , 2023...
  • Page 87 Audio output for individual SMPTE audio channel labels can be changed here. Check the Use SMPTE audio labels checkbox to route audio output based on SMPTE audio channel configuration labels. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 86 - October 31 , 2023...
  • Page 88 Add a new preset or delete the current preset. Audio configuration for an audio preset can be changed here. Click Return to return to Audio Channel Mapping configuration. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 87 - October 31 , 2023...
  • Page 89 For any SR-5400C with CineCache™, you can setup a fallback mechanism for the primary Storage Type by checking the Enable Secondary Storage option & selecting the storage type from the drop-down GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 88 - October 31 , 2023...
  • Page 90 This setting should be selected for centralized playback with SCL Servers • IMB Storage: Playback will use local storage for playback. Note: For GDC Cinema Automation 2.0 (CA 2.0) setup with Centralized Playback; please choose ‘CineCache’ as the Primary storage in Storage as ‘Attached Storage’.
  • Page 91 Increase Rebuild Speed High bitrate playback test (Refer to Section 7.3.1 for details.) * SCL or Streaming Content Library Servers, which are used in the GDC Cinema Automation 2.0 environment. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 90 -...

  • Page 92: Actions Of Portable/Enterprise Storage

    Select the drive name and click on Create. The RAID creation process will be initiated and the progress will be shown. Once complete, click on Close to return to the Storage sub-tab GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 91 - October 31 , 2023...

  • Page 93: Hard Disk Information

    (in the form of a .txt file). Click on Close to return to the Storage sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 92 - October 31 , 2023...

  • Page 94: Raid Filesystem Check

    (in the form of a .txt file). Click on Close to return to the Storage sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 93 - October 31 , 2023...

  • Page 95: Storage Performance

    (in the form of a .txt file). Click on Close to return to the Storage sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 94 - October 31 , 2023...

  • Page 96: Increase Rebuild Speed

    To resume highest rebuild speed after playback is finished, click on [Increase Rebuild Speed] Increase Rebuild Speed. This will immediately set RAID array to rebuild at highest speed. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 95 - October 31 , 2023...

  • Page 97: High Bitrate Playback Test

    (in the form of a .txt file). Click on Close to return to the Storage sub-tab. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 96 - October 31 , 2023...
  • Page 98 Service Door tamper. Note: The SR-5400C will not allow playback if these tampers are not cleared. For IMB Marriage; refer to the SR-5400C Installation Manual. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 97 - October 31 , 2023...
  • Page 99 Select Enable NTP address and click to start using the NTP server. Note: Time adjustments will be limited in accordance with DCI specifications (+/-360 seconds). GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 98 - October 31 , 2023...
  • Page 100 Validate IP’s After setting the above network configurations, click Validate IP’s to check the correctness of the IPs entered. A pop-up opens displaying the result. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 99 - October 31 , 2023...
  • Page 101 Check Network Access and click Test Connectivity. Click to open the pop-up window. Select Interface from dropdown Check IP Conflict and click Check Conflict. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 100 - October 31 , 2023...
  • Page 102 A pop-up window will be shown to display the log extraction progress. After log generation, a pop-up window will be shown to save or open the extracted file. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 101 - October 31 , 2023...
  • Page 103 Restore Restore option will restore the IMB configuration from a backup file. Users can upload the configuration files. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 102 - October 31 , 2023...

  • Page 104: Maintenance

    Software Upgrade When this button is clicked, a pop-up window will be shown with an option to choose and upload any GDC issued upgrade files. Refer to Section 7.5.1 for more details. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL...

  • Page 105: Software Upgrade

    Upgrade screen will be displayed. Click on Choose file select the upgrade file from the folder where it has been downloaded & click on Open. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 104 - October 31 , 2023...
  • Page 106 A pop-up window will be shown asking for the password for the upgrade package. Please contact GDC Technical support in case you do not know the password for the upgrade file. Click on button, after entering the correct password.
  • Page 107 In order to complete the upgrade process, the SR-5400C IMB needs to be rebooted. A pop-up message will be displayed which allows the user to reboot the system, by clicking on the Reboot Now button. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 106 - October 31 , 2023...

  • Page 108: Operation Notes

    Web UI Dashboard. 2. Power down the Projector after the SR-5400C is powered down. 3. Power down the Enterprise Storage attached to the SR-5400C. GDC SR-5400C STANDALONE INTEGRATED MEDIA BLOCK™ USER MANUAL - 107 - October 31...
  • Page 109 GDC Technology manufacturing facility is ISO 9001:2015 certified. Copyright © 2023 GDC Technology Limited. All Rights Reserved. All trademarks listed in this manual are properties of their respective owners. Specifications are subject to change without notice due to ongoing product development and improvement.

Table of Contents