VBA-SSR4 operation manual Product introduction VBA-SSR4 is a panel controller for CASAMBI wireless, long-range network. The panel includes It integrates a proximity sensor(Built-in microwave 5.8G module). Device will wake up when ther e's a hand montion detected within 30 cm, and human motion detected within 80 cm.
VBA-SSR4 operation manual Installation The VBA-SSR4 is composed of a power supply and a panel, follow the instructions below to install it. Accessory: Screw Switch Panel Power Supply Step 1: Power Supply Assembly Caution Direction Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
Page 4
VBA-SSR4 operation manual Step 2: Switch Panel Assembly 1. Mount the top buckle at an angle. 2. Press these two sides to tight the buttom buckles. Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
VBA-SSR4 operation manual TECHNICAL DATA Rated input voltage • 220-240Va Pin voltage • 3.3Vdc Relay output voltage • 220-240Vac • L1: LED lighting module 300W LED driver / Incandescent lamp 300W Relay peak power • L2: LED lighting module 300W LED driver / Incandescent lamp 300W Ambient temperature ta •...
Cyan light: default background light, light up when there's action detected(key or proximity) and the selected preset is inactive or relay is switched The background light can be other colors using Casambi App (as in Figure ① ② ③...
Page 9
VBA-SSR4 operation manual Figure ④ ② ① ③ ⑥ ⑤ Figure 2 Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
Page 10
VBA-SSR4 operation manual Pair the device into network After installed the device, it can be seen in “nearby devices”, pair it into your desired network. If it is paired in others' network, follow the steps in Figure 3 in the app, when the progress bar appears, restart the device, then unpaired success. ②...
Page 11
VBA-SSR4 operation manual (as in Figure _ When “Use toggle” function is activated, it will allow each preset button to activate/deactivate the programmed action on each preset button press. ① ② ③ Figure 5 Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
Page 12
VBA-SSR4 operation manual Figure ① ④ ③ ② ⑥ ⑦ ⑤ Figure 6 Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
Page 13
VBA-SSR4 operation manual Figure _ Button 3 as “Dim down”, tap for step dimming, long press for continuous dimming. _ Button 4 as “Dim up”, tap for step dimming, long press for continuous dimming. ① ④ ③ ② ⑥ ⑦ ⑤...
Page 14
VBA-SSR4 operation manual Figure Figure ① ④ ③ ② ⑥ ⑦ ⑤ Figure 8 Elektrogros AG Rütistrasse 18, CH-8952 Schlieren T: 044 730 56 56 W: www.elektrogros.ch info@elektrogros.ch...
Need help?
Do you have a question about the VLINCA VBA-SSR4 and is the answer not in the manual?
Questions and answers