Inch Drive Assembly - Dell OptiPlex E1 Service Manual

drive-mounting
screws (4)
)LJXUH  ,QFK 'ULYH $VVHPEO\ 5HPRYDO
To remove a 5.25-inch drive assembly, follow these steps:
When you replace the 5.25-inch drive, place the front of the drive toward the
front of the bracket; then install the four screws, but do not tighten them. Align
the screws with the score marks on the bracket, and tighten the screws in the
order stamped on the bottom of the bracket.
Check the alignment of the computer cover around the 5.25-inch drive bezel.
Adjust the drive forward or backward on the bracket to align it.
front of computer
Removing and Replacing Parts 4-9