Dell Dimension 2100 System Reference Manual page 36

Table 11. Boot Screen Options
Option Function
Quiet Boot Enabled (default) displays the Dell logo. Disabled displays the normal
POST messages.
Quick Boot When set to Enabled, this option shortens the POST by eliminating some
tests. If set toDisabled (default), all POST tests occur.
Restore on Determines what state the computer enters when AC power is restored
AC/ Power after a power loss. Settings are as follows:
Loss
•
•
•
On LAN This option controls how the computer responds to a Wakeup On LAN
event. The settings for this option are Power On or Stays Off.
On PME This option controls how the computer responds to a PCI power
management enabled (PME) wakeup event. The settings for this option
are Power On or Stays Off (default).
Last State (default) — Computer returns to the state it was in when
power was lost.
Stays Off — Computer stays off when power is restored; you must
press the power button to restore power.
Power On — Computer starts up when power is restored.