Type 3 Battery Holder - HP dx2420 - Microtower PC Service & Reference Manual
Business pc
Hide thumbs
Also See for dx2420 - Microtower PC:
- Hardware reference manual (59 pages) ,
- Troubleshooting manual (21 pages) ,
- Illustrated parts & service map (3 pages)
Table of Contents
Advertisement
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to
Setup (F10) Utility on page
Type 3 Battery Holder
1.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2.
Insert the new battery and position the clip back in place.
Figure 6-46
3.
Replace the computer access panel.
4.
Plug in the computer and turn on power to the computer.
5.
Reset the date and time and any special system setups using Computer Setup. Refer to
Setup (F10) Utility on page
3.
Removing the battery – Type 3 holder
3.
Computer
Computer
Battery
67
Advertisement
Table of Contents
