6.
Disconnect the power cable (1) and data cable (2) from the back of the hard drive.
Figure 6-30
7.
Remove the four screws that secure the hard disk drive to the hard disk drive cage (1), then slide
the hard disk drive out of the hard disk drive cage (2).
Figure 6-31
Installing an Internal 3.5-inch Hard Drive
1.
Follow the steps in
cage and, if necessary, the existing hard drive.
Disconnecting the Hard Drive Cables
Removing the Hard Drive
Removing an Internal 3.5-inch Hard Drive on page 53
to remove the hard drive
Drives
55