Table of Contents
Advertisement
●
Boot
●
Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
CAUTION:
changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
Computer Setup—Main
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 1
Computer Setup—Main
Option
System Time
System Date
Language
Floppy Diskette A:
1st Drive
2nd Drive
3rd Drive
4th Drive
System Information
2
Computer Setup (F10) Utility
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)
Description
Allows you to set system time.
Allows you to set system date.
Allows you to select language.
Allows you to set drive A to:
●
Disabled
●
1.44 MB 3.5"
●
Not Installed
For each, allows you to:
●
(view only)
◦
Capacity (Size - HDD only)
◦
Transfer Mode
◦
SATA Speed
◦
NCQ
●
Smart Support - run HDD self-test for selected channel:
◦
SMART Status Check
◦
SMART Short Self-Test
◦
SMART Extended Self-Test
(view only)
●
Installed Memory
●
Memory Bank 1
●
Memory Bank 2
●
Memory Bank 3
ENWW
Advertisement
Table of Contents
