Computer Setup-(Action Choices) - HP dx2200 - Microtower PC Utility Manual

Table 9 Computer Setup—PC Health Status (continued)
VBAT (V)
3VSB (V)
Computer Setup—(Action Choices)
NOTE:
configuration.
Table 10 Computer Setup—(Action Choices)
Option
Load Optimized
Defaults
Set Supervisor
Password
Set User Password
Save & Exit Setup
Exit Without Saving
ENWW
(view only)
(view only)
Support for specific Computer Setup options may vary depending on the hardware
Description
Allows you to reset Computer Setup to factory defaults.
Allows you to establish a password to control access to Computer Setup.
Allows you to establish a password to control access to the computer. (Supervisor password must
be set before you can set a User password.)
Allows you to save current settings and exit Computer Setup.
Allows you to exit Computer Setup without saving changes.
Computer Setup (F10) Utilities 11