Simfer SR-2515 Instruction Manual page 29

Leveling feet
To avoid vibration, the appliance must be leveled.
If required, adjust the leveling feet to compensate for the uneven floor.
The front should be slightly higher than the rear to aid in door closing.
Leveling feet can be turned easily by tipping the cabinet slightly.
Turn the leveling feet counter clockwise
lower it.
Power the appliance
After installing the product, please let it stay for more than 2 hours before turning
on the power, otherwise it will lead to a decrease in cooling capacity or a damage
to the product.
Tips for energy saving
• Do not place the appliance near cookers, radiators or other heat sources. If the
ambient temperature is high, the compressor will run more frequently and for
longer, resulting in increased energy consumption.
• Ensure that there is sufficient ventilation at the base of the appliance, on the sides
of the appliance and at the back of the appliance.
• Please also observe the spacing dimensions in the chapter "Installation".
• The arrangement of drawers, shelves and trays as shown in the product overview
offers the most efficient use of energy and should be retained as far as possible.
• To obtain a larger storage space (e.g. for large refrigerated/frozen goods), the
middle drawers and shelves can be removed. The top and bottom drawers and
shelves should be removed last if necessary.
• An evenly filled refrigerator/freezer compartment contributes to optimal energy
use.
• Allow warm food to cool before placing it in the refrigerator/freezer compartment.
Food that has already cooled down increases energy efficiency.
• Allow frozen food to defrost in the refrigeration compartment The coldness of the
frozen food reduces the energy consumption in the refrigerator compartment and
thus increases the energy efficiency.
• Open the door only as briefly as necessary to minimise cold loss. Opening the door
briefly and closing it properly reduces energy consumption.
• Setting the temperature no colder than necessary contributes to optimal energy
use.
• The door gaskets of your appliance must be perfectly intact so that the doors close
properly and energy consumption is not increased unnecessarily.
to raise the unit, clockwise
29
to