Taurus EASY INOX Manual page 8

and you will need to reset the parameters of the
appliance.
- WARNING: Danger of explosion if the battery is
incorrectly replaced.
- WARNING: DO NOT INGEST THE BATTERY;
CHEMICAL BURN HAZARD. This product
contains a coin/button cell battery. If the
coin/button cell battery is swallowed it can cause
several internal burns in just two hours and can
lead to death.
- Keep new and used batteries away from
children. If the battery compartment does not
close securely, stop using the product and keep
it away from children.
- If you think batteries might have been
swallowed or placed inside any part of the body,
seek immediate medical attention.
- If the coin cell battery contents come into
contact with the skin, immediately wash the area
with mild soap and water. If coin cell battery
liquid gets into the eyes, rinse them with water
over the open eye for 15 minutes or until irritation
ceases. If medical attention is needed, the
battery electrolyte is composed of an organic
solvent and lithium salts.
- Remove the cover of the battery compartment.
(1)
- Check that the plastic covering that protects the
battery has been removed (some batteries are
sold with a protective covering).
- Put the battery in its compartment, respecting
the polarity. (2)
- Close the battery compartment cover again.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE (Fig.2):
1. Press the button (
2. The LCD display will show its start routine as it
powers on.
3. Wait until the "0" is shown on the display.
4. Place the item to be weighted on the scale (or
in the bowl if required). The LCD will show the
weight reading.
5. After weighing press (
to turn off the scale or it will automatically power
off in 2 minutes.
) to turn on the scale.
) button for 3 seconds
MODES
This scale has three weighing modes (solid
weight mode, water volume mode and milk
volume mode).
- To measure different items you can select the
required weighing mode by pressing (
WEIGHING UNITS SELECTOR FUNCTION:
If you select solid weight mode a solid weight
unit will be shown (g-lb:oz) if you select water or
milk volume mode a volume unit will be shown
(ml:fl'oz).
- You can select the desired weighing unit by
pressing ( ) button for 3 seconds.
TARE FUNCTION (Fig.3):
The tare function allows you to weight another
item consecutively after weighing the first item
without removing it from the scale.
1. Press the button (
2. The LCD display will show its start routine as it
powers on.
3. Wait until "0" is shown on the display. Put the
container on the scale platform.
4. The LCD display will show the weight of the
container.
5. Touch the button (
the container (reset to zero).
6. Add the ingredients into the container.
7. The LCD will show the weight of the
ingredients only.
NOTE: If the tared weight is higher than 200g the
screen will show this symbol in the lower-left
corner , if the tared weight is inferior this
symbol will not be shown, but the function will
work anyway.
AUTO-DISCONNECT FUNCTION (STAND-BY):
- In order to save energy, the appliance passes
to stand-by after 2 minutes if the user does not
use it.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- After weighing press (
to turn off the scale or leave the scale and it will
automatically power off in 2 minutes.
- Remove the battery from the appliance if you
are not intending to use the appliance during an
extended period.
- Clean the appliance.
) button.
) to turn on the scale.
) to clear the weight of
) button for 3 seconds