Default Setup; Apply Defaults And Exit; Ignore Changes And Exit; Save Changes And Exit - HP DC7600 - Utility Manual

Computer Setup (Continued)
Heading
File
(continued)

Storage

✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Option

Default Setup

Apply Defaults and Exit

Ignore Changes
and Exit

Save Changes and Exit

Device Configuration

www.hp.com
Description
Save Current Settings as Default
Saves the current system configuration settings
as the default.
Restore Factory Settings as Default
Restores the factory system configuration
settings as the default.
Applies the currently selected default settings
and clears any established passwords.
Exits Computer Setup without applying or
saving any changes.
Saves changes to system configuration or
default settings and exits Computer Setup.
Lists all installed BIOS-controlled storage
devices.
When a device is selected, detailed
information and options are displayed.
The following options may be presented.
Diskette Type
Identifies the highest capacity media type
accepted by the diskette drive.
Legacy Diskette Drives
Options are 3.5" 1.44 MB and
5.25" 1.2 MB.
Drive Emulation
Allows you to select a drive emulation type for
a certain storage device. (For example, a Zip
drive can be made bootable by selecting
diskette emulation.)
Computer Setup (F10) Utility
5