Subscribe to Our Youtube Channel
Related Manuals for Titan Dynamics Tornado V2
Summary of Contents for Titan Dynamics Tornado V2
- Page 1 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Titan Dynamics – Tornado V2 Recreational use only – contact for commercial licensing Build & User Manual Revision 1.0 Page 1 of 18...
-
Page 2: Table Of Contents
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Contents Section 1: Model Information ......................3 Section 2: Model Specifications & Performance ................3 2.1: Physical Characteristics ......................3 2.2: Aircraft Performance: ........................ 4 Section 3: Required Build Materials ....................6 Section 4: 3D printing ........................... -
Page 3: Section 1: Model Information
Join our Discord server Section 1: Model Information Tornado V2 represents the first release of a new generation of Titan Dynamics aircraft. Built with a focus on toolless assembly and usability, the Tornado V2 features removable wings with telescoping spars and wing connectors that make field assembly a breeze, no longer requiring fussing with wiring in the fuselage. -
Page 4: Aircraft Performance
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server 2.2: Aircraft Performance: Below are some plots showing aircraft performance at different all-up weights. The values predicted are not perfect, and values like efficiency can vary greatly based on the choice of motor and propeller, among many other factors. - Page 5 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server 9000mAh 6S2P Molicel P45B: Tattu 3300mAh 6S: Page 5 of 18...
-
Page 6: Section 3: Required Build Materials
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Section 3: Required Build Materials Spars needed (solid rod if no OD/ID specified): (1) 10 OD x 8 ID x 150mm (Front main fuselage spar) (1) 8 OD x 6 ID x 150mm (Rear main fuselage spar) -
Page 7: Section 4: 3D Printing
Section 4: 3D printing 4.1: Things to know before you start printing. 1. Titan Dynamics strongly recommends using Colorfabb HT-LWPLA. While it can be troublesome to initially tune, if Colorfabb’s guide is followed, the resulting parts are light, strong, and temperature resistant 2. -
Page 8: Part Orientation
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server • High temp Polycarbonate or PETG parts should be triple wall and high infill (25%). We recommend using the latest version of OrcaSlicer for your prints. Bambu Studio, Prusaslicer, and others don’t have key parameters that increase success when printing... - Page 9 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Page 9 of 18...
-
Page 10: Tuning "Xy Hole Expansion
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server 4.3: Tuning “XY Hole Expansion” It is very important to check the fitment of the carbon rods in their holes on the first parts you print. Because everyone may be using different printers, materials and slicer settings, it is not possible to provide the models with a slicing profile and hole size that will work for everyone. -
Page 11: Bed Adhesion And Warping
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Print your first part with carbon spar hole and check fitment, if it is too tight increase the XY Hole Expansion setting in the “Quality” then “Precision” section in OrcaSlicer (or your slicer’s similar setting). -
Page 12: Section 5: Assembly Of 3D Printed Parts
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Section 5: Assembly of 3D Printed Parts Below are a few exploded views of the Tornado V2 to help with assembly. Page 12 of 18... - Page 13 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server The spar layout for Tornado V2 is as depicted below Page 13 of 18...
- Page 14 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server • Medium CA glue should be used to assemble all glued parts. • When first putting the glued parts together be sure to wipe any excess glue off before it sets.
-
Page 15: Section 6: Final Setup & Tuning Tips
Join our Discord server Section 6: Final Setup & Tuning Tips • Titan Dynamics strongly recommends the use of Arduplane for all our models. If you encounter an issue in flight, the data logs Ardupilot creates are invaluable for finding the root cause of any issue and increasing future chances of success. -
Page 16: Section 7: Additional Images
Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Section 7: Additional Images Page 16 of 18... - Page 17 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Page 17 of 18...
- Page 18 Titan Dynamics Titan Dynamics Webpage Visit our Facebook page Join our Discord server Page 18 of 18...
Need help?
Do you have a question about the Tornado V2 and is the answer not in the manual?
Questions and answers