Polaris SLINGSHOT RIDECOMMAND+ Manual page 16

ACTIVATING RIDE COMMAND+
ACTIVATE RIDE COMMAND+
1. Log into the Slingshot app.
2. Add your vehicle to your Garage. See the Add a Vehicle to the Garage
section for steps.
3. Turn on the vehicle. Make sure the key fob is present and stays near the
vehicle during the activation process.
4. Tap the Activate tile on the home screen or open the Garage and tap RIDE
COMMAND+ Activate.
5. Fill in your contact information and tap Continue.
6. Read through the license agreement, and tap Accept if you agree to the
terms.
7. Upon acceptance, you will automatically be brought to the activation page.
8. Follow the prompts on the screen to verify Proof of Possession. Each step
may take up to 3 minutes.
9. If the vehicle and mobile device are communicating properly, you will receive
the following message: RIDE COMMAND+ is active.
10. Tap OK. Ownership has now been confirmed and RIDE COMMAND+
features are active.
TROUBLESHOOTING
• If the Slingshot app displays the message "Activation error. Please try again"
or "No GPS location from vehicle," retry activation. Move the vehicle and
mobile device to an open area with good cellular service and limited tree
coverage.
• The activation process needs to be completed within 10 minutes. If it is not
completed in this time, the process will time-out and will need to be restarted.
• While you can begin the account registration process on the RIDE
COMMAND website, the Slingshot app makes it easier to add your vehicle to
your Garage.
• If you need more assistance, see the Troubleshooting section or contact your
Slingshot dealer.
14