WebPAM User Manual
The information tab displays the following information:
•
Enclosure Type – The manufacturer's model name or number.
•
Fan Speed – The RPM of the enclosure's cooling fans.
•
Temperature – The internal temperature of the enclosure. Each reading
reflects a separate measurement.
•
Power Status – The voltages supplied by the enclosure's 12V and 5V
systems.
The Fan, Temperature and Power icons change color when an error is
indicated, as shown below.
State
Green
Blinking
Amber
Red
Dark
An incident refers to one occurance of out-of-range voltage, temperature or fan
speed. Any incident requires immediate attention.
For more information on Enclosures, replacing disk drives and other repair
operations, refer to the SuperSwap User Manual.
Fan Error
Temperature Error
Status
Disk drive is present
and ready
n/a
Disk drive:
•
is spinning up
•
is critical
•
is rebuilding
•
reports a SMART
error
Disk drive:
•
is offline
•
is not installed
Power is off
Power Error
LEDs
Activity
Disk drive is present
and ready
Read/write activity
n/a
n/a
Disk drive:
•
has failed
•
is not installed
84
Enclosure
Normal status
n/a
1 incident
(see below)
Enclosure is critical
but still functional
Attention required
2 or more incidents
(see below)
Disk drives are
spinning up