Table of Contents
Advertisement
•
Full Initialization – Erases all sectors of the physical drives being
added to the logical drive.
•
None – No initialization. This choice is not recommended.
14. Click the Next button.
The result of the logical drive creation operation are displayed.
Click on the Logical Drive
logical drive.
Before you can use your new logical drive, you must partition and format the
logical drive using your PC's operating system. See "Appendix B: Partition and
Format" on page 105 for more information.
JBOD
In WebPAM, JBOD is created, managed and deleted the same as a logical drive.
You can also use the FastTrak BIOS for this purpose. See the FastTrak User
Manual for more information on the BIOS.
In addition, if you attach a physical drive that was initialized using Windows disk
management, that drive will be automatically recognized as a JBOD by the
FastTrak controller and WebPAM.
Icon to see all of the information about your new
65
Chapter 5: Monitor and Manage
Advertisement
Table of Contents
