Dell LATITUDE PRX System Information Manual page 18

16
D e l l L a t i t u d e C / Po r t I I A P R S y s t e m I n f o r ma t i o n G u i d e
NOTICE: If you are using a monitor with the monitor stand
monitor from the stand before moving the docking control base into place.
Gently push the computer forward until the docking connector is
c
fully engaged.
Docking for the First Time With Windows XP and Windows 2000
Dock and turn on your computer.
1
Press <F2> during the system boot routine to view the system setup
2
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
Your system will continue the boot process.
In Windows 2000, the Add New Hardware Wizard appears.
NOTE: If your computer is running Windows XP , the operating system
automatically installs the drivers. If your computer is running Windows 2000,
the Add New Hardware Wizard automatically installs your drivers.
Docking for the First Time With Windows Me
Dock and turn on your computer.
1
Press <F2> during the system boot routine to view the system setup
2
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
Your system will continue the boot process.
The Add New Hardware Wizard appears.
Select Search for the Best Driver for Your Device (Recommended)
6
and click Next.
Click Next.
7
Follow the prompts on the Add New Hardware Wizard.
8
,
remove the