Thermostat Programming; Manual Operating Modes - Plikc NEVE PRO W User And Installation Manual

Thermostat Programming

1. Press the PRG button once.
2. Press the up or down buttons until the day "LUN" (Monday) starts flashing.
3. Press the SET button once; the display will show DAILY PHASE 1, and the time will flash.
Use the up or down buttons to set the start time of the phase.
4. Press the SET button again and use the up or down buttons to set the desired temperature,
then press SET to confirm.
5. At this point, DAILY PHASE 1 is programmed, and the display will move to DAILY PHASE 2.
Repeat steps 3 and 4 to program the next daily phases.
6. Once all daily phases have been programmed, the thermostat will return to DAILY PHASE 1,
and the day "LUN" will flash.
7. Press the up button to switch to "MAR" (Tuesday).
8. Repeat steps 3 to 7 for each day until "DOM" (Sunday).
9. When all 7 days have been programmed, press HOME to confirm the settings or wait 60 se-
conds for automatic confirmation.
10.
16
Plikc S.r.l. - Via del Lago Terrione, 83 - 00165 Roma - info@plikc.com - www.plikc.com
NOTE: If you do not need all 8 daily phases, you can exclude them by following this procedure.
First, select the phase you want to exclude. Once selected, press the "Clock" button. At this
point, instead of displaying the time, the screen will show " - - - -". Then, press the SET button
to confirm the exclusion of that phase. This procedure should be repeated for all the phases
that you want to exclude. However, it is important to note that if you delete an intermediate pha-
se, for example Phase 5, all the following phases will shift back. This means that Phase 6 will
become Phase 5, Phase 7 will become Phase 6, and so on. NOTE: Another way to disable
unnecessary daily phases is to set them to a temperature low enough to prevent activa-
tion.Ad esempio impostandole a 10°C.Ad esempio impostandole a 10°C. For example, set-
ting them to 10°C ensures that the heating system does not turn on, effectively neutralizing tho-
se phases.

Manual Operating Modes

The thermostat has four manual modes: - Temporary manual mode - Permanent manual mode -
Hourly manual mode - Holiday mode.
Plikc S.r.l. - Via del Lago Terrione, 83 - 00165 Roma - info@plikc.com - www.plikc.com 17