Example:
If you want the radiators to turn on at 07:00 and off at 09:00, then turn on again at 12:00 and off at
14:00, then turn on again at 16:00 and off at 18:00, and finally turn on at 20:00 and off at 22:00, the
programming will be as follows:
Phase 1: At 07:00, set the temperature to 21°C to turn the radiators on.
Phase 2: At 09:00, set the temperature to 16°C to turn the radiators off.
Phase 3: At 12:00, set the temperature to 21°C to turn the radiators on.
Phase 4: At 14:00, set the temperature to 16°C to turn the radiators off.
Phase 5: At 16:00, set the temperature to 21°C to turn the radiators on.
Phase 6: At 18:00, set the temperature to 16°C to turn the radiators off.
Phase 7: At 20:00, set the temperature to 21°C to turn the radiators on.
Phase 8: At 22:00, set the temperature to 16°C to turn the radiators off.
This setup ensures that the radiators will heat the environment only during the chosen time slots,
keeping a comfortable temperature when needed while avoiding unnecessary energy consump-
tion.
With this programming, at 07:00, the thermostat will enter Phase 1 and will turn on the radiators until
reaching a temperature of 20°C. This will continue until 09:00, when Phase 2, set at 15°C, will cause
the radiators to turn off until 12:00, when Phase 3, set at 20°C, will activate and turn the radiators
back on. This process will continue for the rest of the day according to the set schedule.
Of course, following this hypothetical scenario, if for any reason the indoor temperature drops below
15°C, the radiators will turn on earlier than the scheduled next phase to maintain the set minimum
temperature.
14
Plikc S.r.l. - Via del Lago Terrione, 83 - 00165 Roma - info@plikc.com - www.plikc.com
NOTE: The device comes from the factory with the following pre-set programming:
DA LUNEDI' A VENERDI'
ORE
TEMP.
Fase giornaliera 1
06:00
20°C
Fase giornaliera 2
08:00
15°C
Fase giornaliera 3
12:00
15°C
Fase giornaliera 4
14:00
15°C
Fase giornaliera 5
17:00
21°C
Fase giornaliera 6
22:00
15°C
Fase giornaliera 7
- - - -
- -
Fase giornaliera 8
- - - -
- -
To modify the default programming and set a new schedule, you can do so directly from the thermo-
stat or via the "Plikc Smart" app.
NOTE: The programming set directly on the thermostat will be automatically erased as soon
as the device is connected to WiFi and associated with the Plikc Smart account.
The programming set via the Plikc Smart app always takes priority over the one set on the
thermostat.
Plikc S.r.l. - Via del Lago Terrione, 83 - 00165 Roma - info@plikc.com - www.plikc.com
DA SABATO A DOMENICA
ORE
TEMP.
Fase giornaliera 1
07:30
20°C
Fase giornaliera 2
09:30
20°C
Fase giornaliera 3
11:30
20°C
Fase giornaliera 4
13:30
20°C
Fase giornaliera 5
16:30
21°C
Fase giornaliera 6
22:30
15°C
Fase giornaliera 7
- - - -
Fase giornaliera 8
- - - -
- -
- -
15
Need help?
Do you have a question about the NEVE PRO W and is the answer not in the manual?