For The Clients; Dhcpd.conf Script - Compaq BL10e - HP ProLiant - 512 MB RAM Troubleshooting Manual

} || {
echo Unable to mount that directory, no files found
}
}
else
# SOURCE dir is not empty, try to copy those files.
cd $SOURCE
copyfiles
fi
else
# This is not a directory.
FILETYPE=`file $SOURCE`
case "$FILETYPE" in
# "x86 boot sector, system SYSLINUX, FAT (12 bit)"
*boot\ sector,\ system\ SYSLINUX,\ FAT\ *)
mkdir $TMPDIR/tmp.dir.$$;
mount $SOURCE $TMPDIR/tmp.dir.$$ -o loop;
cd $TMPDIR/tmp.dir.$$;
copyfiles;
cd /;
umount $TMPDIR/tmp.dir.$$;
rmdir $TMPDIR/tmp.dir.$$;
;;
*)
echo Sorry, image type not found;
;;
esac
fi

For the clients

Sample scripts and files to be used as guidelines for creating your own are provided in this appendix.
These scripts and files are a necessary part of the PXE installation process.

dhcpd.conf script

A typical "dhcpd.conf" script for Red Hat Linux 8.0 is similar to the following:
ddns-update-style interim;
ignore client-updates;
# This is an upstream network required entry for multiple networks.
subnet 10.10.20.0 netmask 255.255.255.0 {
}
# Pxe Network
subnet 172.48.0.0 netmask 255.255.0.0 {
# --- default gateway
option routers 172.48.0.1;
17