Removing A User; Checking User Status; Specifying Device Settings; Configuring Applications Settings - HP 8000 - Elite Convertible Minitower PC User Manual

5. Click a user to be added to the list and then click OK.
6. Click OK in the Select Users dialog box.
7. Type the Windows password for the selected account, and then click Finish.
NOTE:
a Windows user account using this dialog box.

Removing a user

NOTE: This procedure does not delete the Windows user account. It only removes that account from
Security Manager. To completely remove the user, you must remove the user from both Security
Manager and Windows.
1. Click Start, click All Programs, and then click HP ProtectTools Administrative Console.
2. In the Administrative Console left pane, click User.
3. Click the user name for the account you want to remove, and then click Delete.
4. In the confirmation dialog box, click Yes.

Checking user status

The User section of the Administrative Console shows the current status of each user:
●
Green check mark - Indicates that the user has configured the required security login method(s).
●
Red X - Indicates that the user has not configured a required security login method and will be
locked out of the computer when trying to log in. The user must run the setup wizard to configure
the required login method(s).
● Blank - Indicates that a security login method is not required.

Specifying device settings

Within the Device application, you can configure the computer to automatically lock when a smart card
is removed. However, the computer will lock only if the smart card was used as an authentication
credential when logging on to Windows.
1. Click Start, click All Programs, and then click HP ProtectTools Administrative Console.
2. In the Administrative Console left pane, expand Devices and then click Smart Card.
3. Click the check box to enable or disable locking the computer upon smart card removal.

Configuring Applications Settings

The Settings window includes tools for configuring the behavior of Security Manager and its applications.
To modify the settings:
1. Click Start, click All Programs, and then click HP ProtectTools Administrative Console.
2. In the Administrative Console left pane, click Settings.
ENWW
You must use an existing Windows account and type it exactly. You cannot modify or add
Configuring Applications Settings 13