D®
SONY.
XR-98X90L / 85X90L / 85X90CL
Television
XR�SX90L/75X90CL/65X90L
XR-65X90CL / 55X90L
=T
Dimensions and weight (without Table-Top Stand)
l
(mm)/(inches)
□
©
®
2199 / 86
XR-98X90L
2 199/86
�
XR-85X90L/
1891/74
85X90CL
1 891/74
XR-75X90L/
1668 / 65
75X90CL
1 668/65
XR-65X90L/
65X90CL
1225 / 48
* 1 (Approx.)
XR-55X90L
1 225/48
Dimensions and weight (Table-Top Stand)
(mm)/(inches)
®
@1
@2
-
2199 / 86
/a
1305/ 51
1
1,
-
465 / 18 'l
5
XR-98X90L
2 199/86
/a
1 305/ 51
1,
465 / 18 'l
5
1
XR-85X90L/
1891/74
1
1,
1120 / 44 ' l
1160 / 45
464 / 18 'l
3 /4
a
85X90CL
1 891/74
1
1 120/44
1
1 160/45
3 /,
464 / 18
/,
/
0
XR-75X90L /
1668 / 65
992 / 39 ' l
1032 / 40
395 / 15
3
3
/4
/4
a
75X90CL
1 668/65
3 /4
992 / 39 ' l
1 032/40
3 /4
395 / 15
a
XR-65X90L/
1445 / 57
861 /34
901/35
1,
345 / 13
1
65X90CL
1 445 / 57
861 /34
901/35
1
345 /13
/
,
1225/48
1.
738 I 29 ' l
778 I 30
345 / 13
1
3
/4
XR-55X90L
a
1 225/ 48
1 /4
738 I 29 ' l
778 I 30
3 /4
345 / 13
* 1 (Approx.)
a
Optional Camera and Microphone Unit(not supplied) Cable Management
Note
• Instructions about Hlnstalling the TV to the
Light
sensor*a 2
• Read the supplied safety documentation for
Location of the identification label
Labels for the TV Model No. and Power Supply
rating are located on the rear of the TV.
.---'
;;...-MIC
IMPORTANT NOTICE FOR MEXICO
Operation of this equipment is subject to the
following two conditions: (1) it is possible
that this equipment or device may not cause
harmful interference and (2) this equipment
or device must accept any interference,
including interference that may cause undesired
operation.
For information related to the certificate
number, refer to the package label and / or
product.
Note:
This product uses the following module for
wireless functionalities:
Model: DHUR-SY63
Brand: Wistron NeWeb Corporation
WLAN:
2.4 GHz (2.4000 GHz - 2.4835 GHz)
The remote control shape, layout, availability
5 GHz (5.150 GHz - 5.850 GHz)
and function of remote control buttons may
Bluetooth®:
vary depending on your region/country/TV
model/TV settings.* 4
2.4 GHz (2.4000 GHz - 2.4835 GHz)
Information for the remote control with voice
[I] (') (Power)
TV: Display TV channel list or switch to
command included with this product:
input.
Model: RMF-TX810U•
(Quick settings): Display Quick
Brand: Sony
>
Settings.
-El (Input): Display and select the input
Note: Uses the following device for wireless
source, etc.
functionalities:
Model: UE878
MENU (Control menu): Display the
Brand: UEI
Control menu.
◄ / ►
* To see the model name of the remote control,
/ 0:Onscreenmenu
navigation and selection.
Ji./'lf/
[2.]
�(Back)
�(Home)
Safety Information
Use Google Assistant* 5 * 6 .
l (Google Assistant/ Microphone):
Noticefor customers in the United States of
� ...... +
-(Volume)
America
I
Trade Name: SONY
�(Mute)*'
Model: XR-98X90L / XR-85X90L /
(I (Dashboard): Display Dashboard.
CH+/ - (Channel)
XR-85X90CL / XR-75X90L / XR-75X90CL /
►II
83 (Guide): Display the digital program
guide of TV or Cable/satellite box* 8 •
@] App buttons
Use the following Sony Wall-Mount Bracket with
Compatible Wall-Mount Bracket Information
your TV model.
*1 The remote control backlight will illuminate
when the light sensor detects the ambient
light is low. Automatic illumination of the
backlight can be turned off.
*2 RMF- T X910U only. To see the model name of
the remote control, open the remote control
cover and see the label on the remote control.
*3 The buzzer will emit a sound when you use
I
the remote control finder function. Refer to
the on line Help Guide for details.
*4 For other remote control models, refer to
the on line Help Guide for details.
Note: The picture of remote controller is only
*5 Only for limited region/country/model/
for reference and is subject to the real one.
language.
*6 Google Assistant requires an Internet
connection.
The remote control vary depend of model: The
*7 Accessibility shortcut is available by
buttons on the remote control may have a
pressing and holding� (Mute).
different name or location than the remote
*8 [Cable/Satellite box setup] setting is required.
control shows in this manual.
Use with other Wall-Mount Brackets* 2 may
cause instability and could result in property
814100142
damage or injury.
*1 Only for limited region/country/model.
*2 For instructions on using the Wall-Mount
Bracket with your TV please go to
https://www.sony.com/ am/support for
your TV model and download HWall-Mount
Bracket
Before setting up yourTV
Some TV models are packaged with a detached
Table-Top Stand so you can mount your TV to a
wall right away. See �Installing the TV to the
Wall
you are not mounting the TV to a wall, you will
ff
need to attach the Table-Top Stand (refer to the
Setup Guide).
Be sure to consider the following while setting
up your TV:
• Disconnect all cables when carrying the TV.
• Two or more persons (three or more persons
for 214.8 cm (85 inches), four or more persons
for 247.7 cm (98 inches) and above TV) are
needed to transport a large TV set.
• Correct hand placement while carrying the
*Read this manual before using this product.
TV is very important for safety and to avoid
damage.
• When handling or mounting the TV set, do
not lay down the TV(for applicable TV model
only).
(kg)/(lb.)*
1
XR-98X90L
®
®
©
®
5
/a
1255/49
1
1,
85/3
3
/a
67.2 / 148.1
1 255/49
1
85/3
67,2 / 148,1
5 /
3 /
/,
0
1
1085 / 42
59/2
/a
44.5 I 98.1
3 /4
3
/
2
1, 1 085/42
59/2
/a
44,5 /98,1
1
3 /4
3
3 /4
959 / 37 'l
59/2
3
/a
35.4 / 78
a
959 / 37
7
59/2
35,4 / 78
3 /
3 /
/
0
0
1445 / 57
831/32
57/2
1 /4
24.2 / 53.4
3 /4
1 445 / 57
831/32
57/2
24,2 / 53,4
3 /4
1 /4
1
1.
707 / 27'/a
56/2
1 /4
16.9 / 37.3
1
707 /27
7
56/2
1
16,9 / 37,3
/4
/
/,
0
XR-85X90L
(kg)/(lb.)*
1
XR-75X90L
©
®
@
65X90CL
1536/60
1
1,
68.9/151.8
a
1 536/60
68,9 /151,8
1
/,
a
1549 / 61
45.9 / 101.2
a
3 /
1 549 / 61
45,9 /101,2
/a
1426 / 56
1.
36.6/ 80.7
5
1
5
/a
1 426 / 56
1
1.
36,6 / 80,7
/a
1209 / 47
/a
25 / 55.1
5
5
Securing the TV
5
/ 1 209/47
5
/
25 / 55,1
0
Lh
/a
1067 / 42 ' l
17.7 I 39
5
a
5
/a 1 067 / 42
/a
1
17,7 / 39
Preventing the TV from Toppling
• Secure the TV to a wall and/or Stand.
• Do not allow children to play or climb on
furniture and TV sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
- slippery, unstable and/or uneven surfaces.
- furniture that can easily be used as steps,
such as a chest of drawers.
• Install the TV where it cannot be pulled,
pushed, or knocked over.
• Install the TV so that the TV's Table- T op Stand
does not protrude out from the Stand (not
supplied). If the Table- T op Stand protrudes out
from the Stand, it may cause TV set to topple
over, fall down, and cause personal injury or
Wall
are included within this TV's instruction
damage to the TV.
manual.
ff
additional safety information.
• Route all AC power cords and connecting
cables so that they are not accessible to
curious children.
Recommended Measures to Secure the TV
Consider the following measures when securing
your TV to a Stand (not supplied).
Secure the Stand for the TV.
1
Make sure the Stand can adequately support
the weight of the TV. Use two angle braces
(not supplied) to secure the Stand. For each
angle brace use the appropriate hardware to:
• Attach one side of the angle brace to the
wall stud.
• Attach the other side to the Stand.
Secure the TV to the Stand.
2
Use the optional hardware listed as follows
(not supplied):
• M6 machine screws (screwed into the TV's
Table- To p Stand) (XR-98X90L only).
• M6 machine screws (screwed into the TV's
rear cover) (except XR-98X90L).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support
open the remote control cover and see the
the weight of the TV). Make sure that there
label on the remote control.
is no excess slack in the rope or chain.
XR-98X90L
:::,..._
Suppliers Declaration of Conformity
�
XR-65X90L/ XR-65X90CL / XR-55X90L
Screw hole on the TV's
Table-Top Stand
Sony TV Model No.
XR-75X90L/
75X90CL / 65X90L /
65X90CL / 55X90L
Sony Wall-Mount
SU-WL855"
Bracket Model No.
XR-85X90L / 85X90CL / 75X90L
65X90L / 65X90CL / SSX90L
<D
.
ff
if you want to mount the TV to a wall. If
Screw
(not supplied)
The length of the M6 machine screw differs
depending on the rope or chain diameter.
Please refer to below illustration.
6 - 12(mm)
XR-98X90L
Y
�-�' " '
Rope or chain
TV's Table-Top Stand
XR-85X90L / 85X90CL / 75X90L
8-10(mm)
65X90L / 65X90CL / SSX90L
m
tl.screw (M6)
-
-{
r
LRope or chain
t
Anchor the TV to the wall by using bolts, wall
3
I
85X90CL
anchor and chain (or rope).
XR-98X90L
0
0
I
75X90CL
I
65X90L
I
I
SSX90L
Wall-mount holes
Sony strongly recommends
taking measures to prevent
the TV from toppling over.
Unsecured TVs may topple
and result in property damage,
eye bolts
serious bodily injury or even
(not supplied)
death.
,: : : .,
Wall-anchor
(not supplied)
XR-85X90L / 85X90CL / 75X90L
65X90L / 65X90CL / SSX90L
Wa"m""f,j
•,
.
�-
,,
-�
--�-
M6 eye bolts (not supplied)
Wall-anchor
(not supplied)
� Angle brace
(not supplied)
.....,,.
/J
Please refer to below illustration for MB eye
�Stand
bolt length.
11 - 20(mm)
XR-98X90L
� M8eye bolt
L
TV's rear cover
Please refer to below illustration for M6 eye
bolt length.
XR-85X90L / 85X90CL / 75X90L
8 - 10(mm)
65X90L / 65X90CL / SSX90L
�-M6 eye
machine screw
�
�
t supplied)
L
.
Rope orchain
"-i;, (not supplied)
J
1V"s rear cover
• Your TV is shipped with screws attached to
Note
the rear of the TV depending on the TV model.
.-------
(They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two
screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing
the TV and the Stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.
The BRAVIA" 4K TV Experience
Thank you for choosing Sony! Your new
BRAVIA® TV opens the door to the H4K TV
Experience
. This document will help you get
the most out of your TV. Please take a
ff
moment to register your TV at:
Note
• For supported PC formats, refer to the on line
I
I
75X90CL
XR-85X90L / 85X90CL / 75X90L
Help Guide.
65X90L / 65X90CL / SSX90L
Guidelines for IR Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
Ill---� � �
4 Attach the Wall-Mount Bracket (not supplied)
using the screws (not supplied).
1.SN-m
{15 kgf-cm)
• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
Li... � - - - -
lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.
Installing the TV to the Wall
Using the optional Wall-Mount Bracket (SU-WL855
only)• (not supplied)
I
I
75X90CL
• If using an electric screwdriver, set the torque
Note
at approximately 1.5 N-m {15 kgf-cm).
• Be sure to fasten the Wall-Mount Attachment
when attaching them to the TV. Use only a flat
head screwdriver to install the Wall-Mount
Attachment. Use of another tool might result
in over torqueing the Wall-Mount Attachment
and damaging the TV.
Detaching the Table-Top Stand from the TV
u�
To detach the Table- T op Stand from the TV,
XR-98X90L
remove the screws½.
[
• Follow the instruction guide provided with the
Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV,
especially to determine the strength of the
wall for withstanding the TV's weight.
• Sony is not liable for any damage or injury
caused by mishandling or improper
installation.
• Be sure to store the unused screws and Table
Top Stand in a safe place until you are ready to
attach the Table- T op Stand. Keep the screws
away from small children.
XR-85X90L/85X90CL/75X90L/75X90CL/
Note
65X90L/65X90CL/SSX90L
• Read the supplied safety documentation for
Remove one side of the Table-Top Stand at a time.
additional safety information.
1
Firmly hold the Table- T op Stand securely with
* Only for limited region/country/model.
both hands while the other people lift up the TV.
Using the optional Wall-Mount Bracket (except
SU-WL855) (not supplied)
This TV's instruction manual only provides the
steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied). If
the Table-Top Stand is attached to the TV, the TV
may require detaching the Table-Top Stand; see
HDetaching the Table- T op Stand from the TV".
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety reasons,
Sony strongly recommends that installation
of your TV on the wall be performed by
qualified professionals. Do not attempt to
• Follow the instruction guide provided with the
install it yourself.
Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV,
especially to determine the strength of the
I
I
75X90CL
wall for withstanding the TV's weight.
• The screws for installing the Wall-Mount
(supplied)
Bracket to the TV are not supplied.
• Refer to the following table for wall-mount
hole pattern.
Repeat the previous step and remove the
2
other side of the Table- T op Stand.
Wall-mount hole
Note
pattern
Model Name
• Be careful when lifting the TV as the Table-Top
Stand is detached, the Table-Top Stand may
XR-98X90L
600x400 mm
C)xC!)
topple over and cause personal injury.
XR-85X90L/ 85X90CL
400x400 mm
• Take care when removing the Table- T op Stand
from the TV to prevent it from falling over and
XR-75X90L / 75X90CL
300x300 mm
damaging the surface that the TV is sitting on.
XR-65X90L/ 65X90CL
300x300 mm
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
XR-55X90L
300x300 mm
accessories on the TV.
• Be sure the TV is vertical before turning on. To
avoid uneven picture uniformity do not power
on the TV with the LCD panel facing down.
XR-98X90L only
e[
• When attaching the Table-Top Stand again, be
0
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
0
Except XR-98X90L
• Three or more people are required to detach
the Table-Top Stand.
• Be sure to store the unused screws and Table
• Be careful not to use excessive force while
Top Stand in a safe place until you are ready to
detaching the Table- T op Stand from the TV
attach the Table- T op Stand. Keep the screws
as it may cause the TV set to fall resulting in
away from small children.
personal injury or physical damage to the TV.
Note
• Take care when handling the Table- T op Stand
• Read the supplied safety documentation for
to prevent damage to the TV.
additional safety information.
• For more detailed information, visit Sony
Troubleshooting
Customer Support website.*
General troubleshooting for issues like: black
* Only for limited region/country/model.
screen, no sound, frozen picture, TV does not
respond, or network is lost, do the following steps.
Remove the stand covers.
Restart your lV by pressing the power button
on the remote control for about five seconds.
XR-98X90L
The lV will restart. If the lV does not recover,
try unplugging the AC power cord then press
the power button on the lV and release it. Wait
I
I
75X90CL
for two minutes, and plug in the AC power cord.
Or, press the power button on the lV for about
40 seconds until the lV turns off.
Refer to the Help menu shown below.
bolt
2
Connect your TV to the Internet and perform
3
a software update. Sony recommends you to
keep your TV software updated. Software
updates provide new features and
performance improvements.
Remove the screws from the rear of the TV.
4 Perform the factory data reset.
2
When you plug in the TV, the TV may not
be able to turn on for a while even if you
press the power button on the remote
control or the TV.
It takes time to initialize the system. Wait for
about one minute, then operate it again.
How to reset the TV to factory settings
WARNING: The reset will clear all of yourcustomized
settings including the parental lock setting.
• You can reset the TV to factory settings by
selecting [Factory data reset]. How to select
[Factory data reset], refer to the online Help Guide.
Attach the Wall-Mount Attachment(supplied
• To force factory data reset, unplug the AC
3
with the TV) to the rear of the TV (to make it
power cord. Press and hold CJ button on the
parallel with the wall).
lV, then plug in the AC power cord.
• For security purposes, be sure to remove all
personal and account information before
discarding, selling or passing your TV to
someone else by: unlinking/unregistering,
signing out of and deactivating all network
services as well as factory reset the TV.
PRINTED IN MEXICO
Elbrd: A.M SC: 10-27-2023
MODEL:XR-6SX90CL OBPN: N/A
• Replace the batteries.
I
I
75X90CL
The remote control does not function.
The parental lock password has been
• Enter 4357for the PIN and enter the new PIN.
forgotten.
. ·,
For more information, refer to
.��
the Help Guide.
.'.�
Press-E) (Input) on the
remote control and select
[Help]. lf[Help] does not exist,
�
select [Edit] and add [Help].
=
Specifications
TV system
1.SN-m
System
NTSC: National Television System Committee
{15 kgf-cm)
ATSC: 8VSB Terrestrial
NEXTGEN 1V: ATSC 3.0 compliant (Single tuner)"
QAM on cable: ANSI/SCTE 07 2000 (Does not
include CableCARD functionality)
Wall-Mount Bracket (not supplied)
Channel coverage
Depending on your country/area selection/TV model
" -.. 1 :, i
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69* 2
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
" ... r ::t �
Panel system
LCD (Liquid Crystal Display) Panel, LED Backlight
Speaker output (W)
� "' 1 =
XR-98X90L: 10 + 10 + 10 + 10
XR-85X90L / 85X90CL / 75X90L / 75X90CL /
---
65X90L / 65X90CL / 55X90L:
10+10+5+5
Wireless technology
Protocol IEEE 802.lla/b/g/n/ac
Bluetooth®Version 4.2
Screw (not supplied)
CABLE/ ANTENNA
Input/Output jacks
75 ohm external terminal for RF inputs
HDMI IN 1/2/3/4 (HDCP 2.3-compatible)
Video:
4096 x 2160p (60 Hz)"", 4096 x 2160p
(24 Hz)", 3840 x 2160p (60 Hz)", 3840 x 2160p
(24, 30 Hz), 1080p (24, 30, 60,120 Hz), 1080i
(60 Hz), 720p (24, 30, 60 Hz),480p, PC Formats"
3840 x 2160p (120 Hz)""
Audio:
In eARC (Enhanced Audio Return Channel)
mode
Refer to the online Help Guide for details.
Except eARC mode
5.1 channel linear PCM: 32/44.1/48/88.2/96/
176.4/192 kHz 16/20/24 bits, Dolby Audio,
Dolby Atmos, DTS
eARC/ARC(Enhanced Audio Return Channel/
Audio Return Channel) (HDMI IN 3 only)"
In eARC mode
Refer to the online Help Guide for details.
In ARC mode
Two channel linear PCM: 48 kHz 16 bits, Dolby
Audio, Dolby Atmos, DTS
& DIGITAL AUDIO OUT(OPTICAL)
Digital optical jack (Two channel linear PCM:
48 kHz 16 bits, Dolby Audio, DTS)
USB port 1 supports High Speed USB (USB 2.0)
--S-1, --S-2
USB port 2 supports Super Speed USB (USB 3.2
Genl)
,/',;LAN
10BASE- T /100BASE-TX connector
(Depending on the operating environment of
the network, connection speed may differ. The
communication rate and quality are not
guaranteed.)
Home Network supported files and formats* 5
REMOTE
RS-232C mini jack, IR IN mini jack
These jacks are for receiving the external
control signal.
Power requirements
Power and others
110 V - 240 V AC, 50/60 Hz (U.S.A./Canada
120 V AC, 60 Hz)
Power consumption
In use(W)
XR-98X90L: 505
XR-85X90L / 85X90CL: 367
XR-75X90L / 75X90CL: 281
XR-65X90L / 65X90CL: 265
XR-55X90L: 219
In standby* 8 * 9
Less than 0.5 W with 120 V AC and less than
0.5 W with 240 V AC
Screen size (measured diagonally) (Approx.)
(cm/inches)
XR-98X90L: 247.7 / 97.5 (98" class)
XR-85X90L / 85X90CL: 214.8 / 84.6 (85" class)
XR-75X90L / 75X90CL: 189.3 / 74.5 (75" class)
XR-65X90L / 65X90CL: 163.9 / 64.5 (65" class)
XR-55X90L: 138.8 / 54.6 (55" class)
Display resolution (horizontal x vertical) (pixels)
3840x 2160
Output rating
500 mA (for USB 1), 900 mA (for USB 2)
Optional accessories
Others
Wall-Mount Bracket: SU-WL 855 (except
XR-98X90L I 85X90L / 85X90CL)
Camera and Microphone Unit: CMU-BC1
Operating temperature
0 °C-40 °C / 32 °F -104 °F
*1 Only for limited region/country/model.
*2 2 -36 for NEXTGEN lV scanning range in U.S.A.
*3 When 4096 x 2160p is input and [Wide mode]
is set to [Normal], the resolution is displayed
as 3840 x 2160p. To display 4096 x 2160p, set
[Wide mode] setting to [Full 1] or [Full 2].
*4 Refer to the on screen menu to set [HDMI
signal format].
*5 Refer to the online Help Guide for details.
*6 HDMI IN 3 and 4 only. Use the Ultra High
Speed HDMI Cable to connect.
*7 Connect your audio system to the HDMI IN 3
to route TV audio to your audio system.
*8 Specified standby power is reached after the
lV finishes necessary internal processes.
*9 Standby power consumption will increase
when your TV is connected to the network.
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to
change without notice.
• Subscriptions for services and applications may be
required and additional terms, conditions and/or
charges may apply when using Google Assistant.
• Power consumption will increase when the
built-in MIC is enabled as it is always listening.
• Visit Sony website for more information on
product specifications.
• Dolby, Dolby Vision, Dolby Atmos, Dolby Audio,
Licensing Information
and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation. Manufactured
under license from Dolby Laboratories. Confidential
unpublished works. Copyright© 1992-2022 Dolby
Laboratories. All rights reserved.
• Gracenote, the Gracenote logo and logotype,
HPowered by Gracenote
logo are either registered
trademarks or trademarks of Gracenote, Inc. in the
ff
United States and/or other countries.
• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc.
DTS, Digital Surround, and the DTS logo are
registered trademarks or trademarks of DTS,
Inc. in the United States and other countries.
© 2020 DTS, Inc. ALL RIGHTS RESERVED.
• TUXERA is a registered trademark of Tuxera
Inc. in the US and other countries.
ti Dolby
VISION-ATMOS
gracenote
a nielsen company
dis
TUXERA--
8
4
0 0
11 1 11 1 11 1 1 1 1 1 1 1 1 1 11 1 111 1 1 1 1 111 1 1 1 11 1 11 1 1 1 1 11 1 1 1 1 1 1 11 1 11
4 2
Need help?
Do you have a question about the XR-98X90L and is the answer not in the manual?
Questions and answers