Enabling Dash Support; Supported Platforms - Compaq 6005 - Pro Microtower PC Using Manual

Feature
Microsoft® Active Directory integration
Out-of-band IPv6 phase I certification
Out-of-band IPv6 phase II certification
Out-of-band firmware update
WMI provider for Ethernet port modeling
WMI provider for opaque management data
WMI provider for software inventory
WMI provider for user account management
WMI provider for VLAN teaming extension
Zero-Touch Provisioning Model

Enabling DASH Support

HP does not typically ship platforms in a predefined management mode, unless the
products are ordered through a custom configuration service where the customer
can specify various parameters supporting their infrastructure and deployment
model. In order to enable DASH support on HP platforms the following steps must
be performed:
1. Ensure you have the latest system BIOS and software drivers for your platforms.
2. Set a BIOS administrator password to authorize access to configuration option.
3. Select and enable the appropriate management controller within the system
BIOS.
4. Select the appropriate management mode for the controller (in this case DASH)
within the system BIOS.
5. Enable management functions from the network device
6. Add user accounts to access the management interface on the network device.
The following sections discuss the steps to enable DASH functionality from a remote
management standpoint without requiring physical access to the system; however it
is possible to setup and configure DASH support manually. For instructions on how
to complete this process using where you have local physical access to the system
to be configured, please refer to
with Computer Setup and
BMCC and BACS later in this document.

Supported Platforms

The Broadcom NetXtreme™ Gigabit Ethernet Plus is the default network controller
option for the following platforms:
 HP Compaq 6005 Pro Business PC
Although the Broadcom NetXtreme™ Gigabit Ethernet Plus discrete PCI Express
add-in card is available as an option for HP business class desktops and
workstations, DASH functionality is only supported on the models defined below:
Appendix B: Enabling Management Functionality
Appendix C: Enabling Management Functionality with
TruManage™ Version
1.0 1.1
 


 
 



1.2









