Connecting To The Hp Client Management Web View - Compaq 6005 - Pro Microtower PC Using Manual

Connecting to the HP Client Management Web View

The following steps outline connecting to the out-of-band management service from
the embedded web server included on the Broadcom NetXtreme™ Ethernet Gigabit
Plus controller. This interface provides an alternative control mechanism for utilizing
the DASH functionality without requiring a DASH enabled management console.
These steps assume that both of the following preconditions have been met:
The DASH management functionality has been enabled both in BIOS on the

Broadcom NetXtreme™ Gigabit Ethernet Plus controller.
The user account to connect as has been configured with a password for

authentication.
And the user account has been enabled for use.

Steps to enable and configure DASH in an automatable fashion via Windows®
Management Instrumentation (WMI) are covered in the section
Support. Additional discussions for configuring options manually are covered in
Appendix B: Enabling Management Functionality with Computer Setup
Appendix C: Enabling Management Functionality with BMCC and
1. Using your web browser of choice from a separate computer system, connect to
the IP address and DASH management port of the remote system.
DASH Management Ports
TCP Port Purpose
623 WS-Man over HTTP
664 WS-Man over HTTPS
These are the well-known IANA ports reserved for DASH management traffic.
By default the Broadcom NetXtreme™ Gigabit Ethernet Plus controller will use
these ports for DASH traffic, but the device can be configured to either disallow
HTTP traffic, or use other TCP ports for communication.
2. The web browser makes a connection to the HP Client management Web View,
but will require authentication to grant access to the web page.
Enabling DASH
Example URL
http://172.16.2.17:623
https://172.16.2.17:664
and
BACS.