Sauder Palladia 420606 Manual
  1. Manuals
  2. Brands
  3. Sauder Manuals
  4. Indoor Furnishing
  5. Palladia 420606
  6. Manual
Sauder Palladia 420606 Manual

Sauder Palladia 420606 Manual

L-desk
Hide thumbs Also See for Palladia 420606:

Advertisement

Table of Contents

CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 8:30 a.m. to 5 p.m. EST (except holidays)
L-Desk
Palladia Collection | Model 420606
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-80
Français pg 81-88
Español pg 89-96
Lot # 598252
Purchased: __________________
08/11/23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Palladia 420606 and is the answer not in the manual?

Questions and answers

Related Manuals for Sauder Palladia 420606

Summary of Contents for Sauder Palladia 420606

  • Page 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 8:30 a.m.
  • Page 2 RIGHT DRAWER SIDE (1) NN TOP RIGHT DRAWER FRONT (1) RIGHT UPRIGHT (1) AA DRAWER BACK (1) OO TOP RIGHT DRAWER BACK (1) ADJUSTABLE SHELF (1) TOP RIGHT DRAWER BOTTOM (1) BB FILE DRAWER FRONT (1) RIGHT BOTTOM (1) Page 2 www.sauder.com/service 420606...

  • Page 3: Part Identification

    Now you know Part Identification our ABCs. 420606 www.sauder.com/service Page 3...

  • Page 4: Hardware Identification

    KNOB SET - 1 CARD - 1 CARD - 1 WITH CAP - 2 APPLIQUE CARD - 3 RUBBER P79 GROMMET - 1 P81 CORD CLIP - 3 APPLIQUE CARD - 3 SHELF PIN - 4 SLEEVE - 4 Page 4 www.sauder.com/service 420606...
  • Page 5 1" MACHINE SCREW - 4 S115 S116 1/2" MACHINE SCREW - 2 9/16" LARGE HEAD SCREW - 2 S117 S118 9/16" TAPERED HEAD SCREW - 8 5/8" PAN HEAD SCREW - 8 S120 1/2" FLAT HEAD SCREW - 2 420606 www.sauder.com/service Page 5...
  • Page 6 Options KEYBOARD ON LEFT STEPS 1-31, 60-73 KEYBOARD ON RIGHT STEPS 32-73 Page 6 www.sauder.com/service 420606...
  • Page 7 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. 420606 www.sauder.com/service Page 7...
  • Page 8 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
  • Page 9 Fasten the LEFT BACK (C) to the LEFT END (B). Tighten two HIDDEN CAMS. Just think. The sooner you do this, the sooner you do something else. S u r f a c H I D D E N i t h Notch 420606 www.sauder.com/service Page 9...
  • Page 10 NOTE: The EXTENSION SLIDES will be used later for the KEYBOARD SHELF. 40BC 40BA Push the black lever up and pull the SLIDE from the RAIL. 1/2" PAN HEAD SCREW (3 used in this step) Open end This hole must be here. 40BA Page 10 www.sauder.com/service 420606...
  • Page 11 Step 4 å Carefully flip the LEFT UPRIGHT (E) over. å Push four LARGE HIDDEN CAMS (F9) into the LEFT UPRIGHT (E). Arrow Arrow 420606 www.sauder.com/service Page 11...
  • Page 12 Step 5 å Fasten the LEFT UPRIGHT (E) to the LEFT BACK (C). Tighten two HIDDEN CAMS. i t h f a c S u r D E N H I D Page 12 www.sauder.com/service 420606...
  • Page 13 Step 6 å Turn ten CAM SCREWS (F16) into the LEFT TOP (A). 420606 www.sauder.com/service Page 13...
  • Page 14 Insert two WOOD DOWELS (F19) into the LEFT TOP (A). å Fasten the LEFT END (B) and LEFT UPRIGHT (E) to the LEFT TOP (A). Tighten six HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the END. Page 14 www.sauder.com/service 420606...
  • Page 15 Fasten the LEFT MODESTY PANEL (F) to the LEFT UPRIGHT (E). Use three 2" FLAT HEAD SCREWS (S48). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 2" FLAT HEAD SCREW (3 used in this step) 420606 www.sauder.com/service Page 15...
  • Page 16 NOTE: Be sure the BRACKETS are even with the edges of the BOTTOM. å Push two LARGE HIDDEN CAMS (F9) into the LEFT BOTTOM (D). LARGE 1/2" PAN HEAD SCREW (2 used in this step) Arrow Page 16 www.sauder.com/service 420606...
  • Page 17 Fasten the METAL BRACKETS on the LEFT BOTTOM (D) to the LEFT END (B). Use two LARGE 1/2" PAN HEAD SCREWS (S15). 1-1/2" FLAT HEAD SCREW (2 used for the UPRIGHT) LARGE 1/2" PAN HEAD SCREW (2 used for the BRACKETS) 420606 www.sauder.com/service Page 17...
  • Page 18 Step 11 å Turn three CAM SCREWS (F16) into the LEFT LEG (G). å Push five LARGE HIDDEN CAMS (F9) into the LEGS (G and K). Arrow Arrow Page 18 www.sauder.com/service 420606...
  • Page 19 Side Step: Make nachos. (Optional, but recommended.) S u r f a c H I D i t h D E N i t h f a c S u r D E N H I D 420606 www.sauder.com/service Page 19...
  • Page 20 RAIL in to find the other holes that line up with the holes in the UPRIGHT. Turn a SCREW into these holes. Arrow 1/2" PAN HEAD SCREW (3 used in this step) 40BA Surface without HIDDEN CAMS Open end Page 20 www.sauder.com/service 420606...
  • Page 21 Step 14 å Fasten the LEGS (G and K) to the LEFT TOP (A). Tighten two HIDDEN CAMS. å Fasten the KEYBOARD UPRIGHT (H) to the LEFT TOP (A). Tighten two HIDDEN CAMS. Surface with HIDDEN CAMS 420606 www.sauder.com/service Page 21...
  • Page 22 Push two CORD CLIPS (P81) into the holes in the LEFT TOP (A). å NOTE: The CORD CLIP is used to hold the cord against the TOP. 1" PAN HEAD SCREW (3 used in this step) Page 22 www.sauder.com/service 420606...
  • Page 23 Step 16 å Fasten the LOCK SET (J3) to the LEFT UPRIGHT (E). Use two 1/2" FLAT HEAD SCREWS (S120). The prongs must press into the UPRIGHT. S120 1/2" FLAT HEAD SCREW (2 used in this step) 420606 www.sauder.com/service Page 23...
  • Page 24 Step 17 å Turn four CAM SCREWS (F16) into the RIGHT END (Q). å Push four LARGE HIDDEN CAMS (F9) into the RIGHT END (Q). Arrow Page 24 www.sauder.com/service 420606...
  • Page 25 Step 18 å Fasten two HINGE BRACKETS (H6) to the RIGHT END (Q). Use the SCREWS in the HINGE BRACKETS. 420606 www.sauder.com/service Page 25...
  • Page 26 Step 19 å Turn two CAM SCREWS (F16) into the RIGHT BACK (P). å Push two LARGE HIDDEN CAMS (F9) into the RIGHT BACK (P). Arrow Page 26 www.sauder.com/service 420606...
  • Page 27 Step 20 å Fasten the RIGHT BACK (P) to the RIGHT END (Q). Tighten two HIDDEN CAMS. S u r f a c H I D D E N i t h Notch 420606 www.sauder.com/service Page 27...
  • Page 28 Step 21 å Push four LARGE HIDDEN CAMS (F9) into the RIGHT UPRIGHT (M). Arrow Arrow Page 28 www.sauder.com/service 420606...
  • Page 29 Fasten the RIGHT UPRIGHT (M) to the RIGHT BACK (P). Tighten two HIDDEN CAMS. Don't worry. It isn't Rome. This can be built in a day. i t h o f a c S u r D E N H I D 420606 www.sauder.com/service Page 29...
  • Page 30 Step 23 å Turn ten CAM SCREWS (F16) into the RIGHT TOP (J). Page 30 www.sauder.com/service 420606...
  • Page 31 Insert two WOOD DOWELS (F19) into the RIGHT TOP (J). å Fasten the RIGHT UPRIGHT (M) and RIGHT END (Q) to the RIGHT TOP (J). Tighten six HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the END. 420606 www.sauder.com/service Page 31...
  • Page 32 Step 25 å Push two LARGE HIDDEN CAMS (F9) into the RIGHT MODESTY PANEL (L). Arrow Page 32 www.sauder.com/service 420606...
  • Page 33 NOTE: You should start each SCREW a few turns before completely tightening any of them. 2" FLAT HEAD SCREW (3 used in this step) S u r f a c i t h H I D D E N 420606 www.sauder.com/service Page 33...
  • Page 34 NOTE: Be sure the BRACKETS are even with the edges of the BOTTOM. å Push two LARGE HIDDEN CAMS (F9) into the RIGHT BOTTOM (O). LARGE 1/2" PAN HEAD SCREW (2 used in this step) Arrow Page 34 www.sauder.com/service 420606...
  • Page 35 Fasten the METAL BRACKETS on the RIGHT BOTTOM (O) to the RIGHT END (Q). Use two LARGE 1/2" PAN HEAD SCREWS (S15). LARGE 1/2" PAN HEAD SCREW (2 used for the BRACKETS) 1-1/2" FLAT HEAD SCREW (2 used for the UPRIGHT) 420606 www.sauder.com/service Page 35...
  • Page 36 Push two LARGE HIDDEN CAMS (F9) into the FRONT PANEL (JJ). å Fasten the FRONT PANEL (JJ) to the RIGHT TOP (J). Tighten two HIDDEN CAMS. Arrow S u r f a c H I D i t h o D E N Page 36 www.sauder.com/service 420606...
  • Page 37 Push one CORD CLIP (P81) into the hole in the RIGHT TOP (J). å NOTE: The CORD CLIP is used to hold the cord against the TOP. S118 5/8" PAN HEAD SCREW (4 used in this step) 420606 www.sauder.com/service Page 37...
  • Page 38 NOTE: You should start each SCREW a few turns before completely tightening any of them. å Go to Step 60 to complete assembly. S118 5/8" PAN HEAD SCREW (4 used for the TOP) 1" PAN HEAD SCREW (3 used for the LEG) Page 38 www.sauder.com/service 420606...
  • Page 39 å Turn six CAM SCREWS (F16) into the LEFT END (B) and LEFT BACK (C). å Push six LARGE HIDDEN CAMS (F9) into the LEFT END (B) and LEFT BACK (C). Arrow Arrow 420606 www.sauder.com/service Page 39...
  • Page 40 Fasten the LEFT BACK (C) to the LEFT END (B). Tighten two HIDDEN CAMS. Just think. The sooner you do this, the sooner you do something else. S u r f a c H I D D E N i t h Notch Page 40 www.sauder.com/service 420606...
  • Page 41 Push four LARGE HIDDEN CAMS (F9) into the LEFT UPRIGHT (E). å Fasten the LEFT UPRIGHT (E) to the LEFT BACK (C). Tighten two HIDDEN CAMS. Arrow Arrow i t h f a c S u r D E N H I D 420606 www.sauder.com/service Page 41...
  • Page 42 Step 35 å Turn twelve CAM SCREWS (F16) into the LEFT TOP (A). Page 42 www.sauder.com/service 420606...
  • Page 43 Insert two WOOD DOWELS (F19) into the LEFT TOP (A). å Fasten the LEFT END (B) and LEFT UPRIGHT (E) to the LEFT TOP (A). Tighten six HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the END. 420606 www.sauder.com/service Page 43...
  • Page 44 Fasten the LEFT MODESTY PANEL (F) to the LEFT UPRIGHT (E). Use three 2" FLAT HEAD SCREWS (S48). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 2" FLAT HEAD SCREW (3 used in this step) Page 44 www.sauder.com/service 420606...
  • Page 45 NOTE: Be sure the BRACKETS are even with the edges of the BOTTOM. å Push two LARGE HIDDEN CAMS (F9) into the LEFT BOTTOM (D). LARGE 1/2" PAN HEAD SCREW (2 used in this step) Arrow 420606 www.sauder.com/service Page 45...
  • Page 46 Fasten the METAL BRACKETS on the LEFT BOTTOM (D) to the LEFT END (B). Use two LARGE 1/2" PAN HEAD SCREWS (S15). 1-1/2" FLAT HEAD SCREW (2 used for the UPRIGHT) LARGE 1/2" PAN HEAD SCREW (2 used for the BRACKETS) Page 46 www.sauder.com/service 420606...
  • Page 47 Step 40 å Turn three CAM SCREWS (F16) into the LEFT LEG (G). å Push seven LARGE HIDDEN CAMS (F9) into the LEGS (G and K) and FRONT PANEL (JJ). Arrow Arrow Arrow 420606 www.sauder.com/service Page 47...
  • Page 48 Side Step: Make nachos. (Optional, but recommended.) S u r f a c H I D i t h D E N i t h f a c S u r D E N H I D Page 48 www.sauder.com/service 420606...
  • Page 49 Fasten the LEGS (G and K) to the LEFT TOP (A). Tighten two HIDDEN CAMS. å Fasten the FRONT PANEL (JJ) to the LEFT TOP (A). Tighten two HIDDEN CAMS. S u r f a c i t h o u t H I D D 420606 www.sauder.com/service Page 49...
  • Page 50 Push two CORD CLIPS (P81) into the holes in the LEFT TOP (A). å NOTE: The CORD CLIP is used to hold the cord against the TOP. 1" PAN HEAD SCREW (3 used in this step) Page 50 www.sauder.com/service 420606...
  • Page 51 Step 44 å Fasten the LOCK SET (J3) to the LEFT UPRIGHT (E). Use two 1/2" FLAT HEAD SCREWS (S120). The prongs must press into the UPRIGHT. S120 1/2" FLAT HEAD SCREW (2 used in this step) 420606 www.sauder.com/service Page 51...
  • Page 52 Step 45 å Turn four CAM SCREWS (F16) into the RIGHT END (Q). å Push four LARGE HIDDEN CAMS (F9) into the RIGHT END (Q). Arrow Page 52 www.sauder.com/service 420606...
  • Page 53 Fasten two HINGE BRACKETS (H6) to the RIGHT END (Q). Use the SCREWS in the HINGE BRACKETS. å Turn two CAM SCREWS (F16) into the RIGHT BACK (P). å Push two LARGE HIDDEN CAMS (F9) into the RIGHT BACK (P). Arrow 420606 www.sauder.com/service Page 53...
  • Page 54 Step 47 å Fasten the RIGHT BACK (P) to the RIGHT END (Q). Tighten two HIDDEN CAMS. S u r f a c H I D D E N i t h Notch Page 54 www.sauder.com/service 420606...
  • Page 55 Step 48 å Push four LARGE HIDDEN CAMS (F9) into the RIGHT UPRIGHT (M). Arrow Arrow 420606 www.sauder.com/service Page 55...
  • Page 56 NOTE: The EXTENSION SLIDES will be used later for the KEYBOARD SHELF. 40BC 40BA Push the black lever up and pull the SLIDE from the RAIL. 1/2" PAN HEAD SCREW (3 used in this step) This hole must be here. 40BA Open end Page 56 www.sauder.com/service 420606...
  • Page 57 Fasten the RIGHT UPRIGHT (M) to the RIGHT BACK (P). Tighten two HIDDEN CAMS. Don't worry. It isn't Rome. This can be built in a day. i t h o f a c S u r D E N H I D 420606 www.sauder.com/service Page 57...
  • Page 58 Step 51 å Turn eight CAM SCREWS (F16) into the RIGHT TOP (J). Page 58 www.sauder.com/service 420606...
  • Page 59 Insert two WOOD DOWELS (F19) into the RIGHT TOP (J). å Fasten the RIGHT UPRIGHT (M) and RIGHT END (Q) to the RIGHT TOP (J). Tighten six HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the END. 420606 www.sauder.com/service Page 59...
  • Page 60 NOTE: You should start each SCREW a few turns before completely tightening any of them. Arrow 2" FLAT HEAD SCREW (3 used in this step) S u r f a c i t h H I D D E N Page 60 www.sauder.com/service 420606...
  • Page 61 NOTE: Be sure the BRACKETS are even with the edges of the BOTTOM. å Push two LARGE HIDDEN CAMS (F9) into the RIGHT BOTTOM (O). LARGE 1/2" PAN HEAD SCREW (2 used in this step) Arrow 420606 www.sauder.com/service Page 61...
  • Page 62 Fasten the METAL BRACKETS on the RIGHT BOTTOM (O) to the RIGHT END (Q). Use two LARGE 1/2" PAN HEAD SCREWS (S15). LARGE 1/2" PAN HEAD SCREW (2 used for the BRACKETS) 1-1/2" FLAT HEAD SCREW (2 used for the UPRIGHT) Page 62 www.sauder.com/service 420606...
  • Page 63 Push one CORD CLIP (P81) into the hole in the RIGHT TOP (J). å NOTE: The CORD CLIP is used to hold the cord against the TOP. S118 5/8" PAN HEAD SCREW (4 used in this step) 420606 www.sauder.com/service Page 63...
  • Page 64 Use three 1" PAN HEAD SCREWS (S57). å NOTE: You should start each SCREW a few turns before completely tightening any of them. S118 5/8" PAN HEAD SCREW (4 used for the TOP) 1" PAN HEAD SCREW (3 used for the LEG) Page 64 www.sauder.com/service 420606...
  • Page 65 RAIL in to find the other holes that line up with the holes in the UPRIGHT. Turn a SCREW into these holes. Arrow 1/2" PAN HEAD SCREW (3 used in this step) Open end 40BA Surface with HIDDEN CAMS 420606 www.sauder.com/service Page 65...
  • Page 66 Step 59 å Fasten the KEYBOARD UPRIGHT (H) to the LEFT TOP (A). Tighten two HIDDEN CAMS. Surface with HIDDEN CAMS Page 66 www.sauder.com/service 420606...
  • Page 67 Push the RUBBER SLEEVES (R3) over the SHELF PINS (R2). Insert the SHELF PINS into the hole locations of your choice in the RIGHT UPRIGHT (M) and RIGHT END (Q). Set the ADJUSTABLE SHELF (N) onto the SHELF PINS. (4 used) 420606 www.sauder.com/service Page 67...
  • Page 68 Step 61 å Fasten two HINGES (H10) to the DOOR (R). Use four 9/16" TAPERED HEAD SCREWS (S117). S117 9/16" TAPERED HEAD SCREW (4 used in this step) Page 68 www.sauder.com/service 420606...
  • Page 69 (1 used in this step) The screw on the back side of the HINGE will fit into this slot. HINGE BRACKET Stop Mounting screw HINGE This screw will fit into this slot. Then tighten the screw. 420606 www.sauder.com/service Page 69...
  • Page 70 To adjust the DOOR in or out (depth), loosen the mounting screw one turn and move the DOOR in or out, as needed. Tighten the mounting screw after making adjustments. Mounting screw (depth) Adjusting screw (horizontal) (vertical adjustment) Page 70 www.sauder.com/service 420606...
  • Page 71 Edge with holes 1-1/2" FLAT HEAD SCREW (8 used in this step) S u r f a c i t h o n e h o l These holes must be here. 420606 www.sauder.com/service Page 71...
  • Page 72 Peel the BUMPERS from the LARGE BUMPER CARD (M38). Stick a BUMPER on the KEYBOARD SIDES (HH and KK) as shown. Open end Open end 1/2" PAN HEAD SCREW (6 used in this step) 40BC Open end 40BC Page 72 www.sauder.com/service 420606...
  • Page 73 Use one 1" MACHINE SCREW (S114). S117 9/16" TAPERED HEAD SCREW (4 used for the FRONT) S116 9/16" LARGE HEAD SCREW (2 used for the SHELF) S114 1" MACHINE SCREW (1 used for the KNOB SET) 420606 www.sauder.com/service Page 73...
  • Page 74 Push sixteen SMALL HIDDEN CAMS (F17) into the DRAWER SIDES (T, U, Y, Z, CC, and DD). å Turn sixteen STRAIGHT HEAD CAM SCREWS (F18) into the DRAWER FRONTS (S, X, BB, and NN). Arrow (16 used) Straight head (16 used) Page 74 www.sauder.com/service 420606...
  • Page 75 RIGHT DRAWER FRONT (NN). Tighten four HIDDEN CAMS. å Peel APPLIQUES from the DRAWER APPLIQUE CARDS (P57) and stick them onto each visible HIDDEN CAM. å Repeat this step for the remaining drawers as shown. Groove Groove Groove Groove 420606 www.sauder.com/service Page 75...
  • Page 76 SMALL DRAWER SIDES (T and U) and TOP RIGHT DRAWER FRONT (NN). å Repeat this step for the remaining drawers as shown. Be sure the DRAWER BOTTOM inserts into the DRAWER FRONT groove. Page 76 www.sauder.com/service 420606...
  • Page 77 NOTE: You should start each SCREW a few turns before completely tightening any of them. å Repeat this step for the remaining drawers as shown. 1-1/2" FLAT HEAD SCREW (16 used in this step) Be sure the DRAWER BOTTOM inserts into the DRAWER BACK groove. 420606 www.sauder.com/service Page 77...
  • Page 78 Fasten two KNOB SETS (K30) to the DRAWER FRONTS (X and BB). Use two 1/2" MACHINE SCREWS (S115). S114 1" MACHINE SCREW (2 used for the smaller drawers) S115 1/2" MACHINE SCREW (2 used for the larger drawers) Page 78 www.sauder.com/service 420606...
  • Page 79 RIGHT SIDE (DD). Insert the FILE RODS into the holes of your choice in the FILE GLIDES, depending on your file sizes. L e t t e r t e r L e g L e t 420606 www.sauder.com/service Page 79...
  • Page 80 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or l b s . 5 l b 5 l b l b s .

  • Page 81: Liste De Pièces

    DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour DESSUS GAUCHE ............1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) contacter Sauder en EXTRÉMITÉ GAUCHE ..........1 40BA GLISSIÈRE D'EXTENSION ........2 ce qui concerne cet ARRIÈRE GAUCHE ............1 40BC COULISSE D'EXTENSION ........2 DESSOUS GAUCHE ..........1 élément, faire référence...
  • Page 82 Fixer les CONSOLES EN MÉTAL sur le DESSOUS GAUCHE (D) REMARQUE : Les COULISSES D'EXTENSION seront utilisées à l'EXTRÉMITÉ GAUCHE (B). Utiliser deux GRANDES VIS TÊTE ultérieurement pour la TABLETTE DE CLAVIER. GOUTTE DE SUIF 13 mm (S15). Page 82 www.sauder.com/service 420606...
  • Page 83 REMARQUE : Il est préférable de donner quelques tours de Faire tourner quatre VIS D'EXCENTRIQUE (F16) dans tournevis à chaque VIS avant de les serrer toutes à bloc. l’EXTRÉMITÉ DROITE (Q). Enfoncer quatre GRANDES EXCENTRIQUES ESCAMOTABLES (3) dans l’EXTRÉMITÉ DROITE (Q). 420606 www.sauder.com/service Page 83...
  • Page 84 REMARQUE : Il est préférable de donner quelques tours de REMARQUE : Il est préférable de donner quelques tours de tournevis à chaque VIS avant de les serrer toutes à bloc. tournevis à chaque VIS avant de les serrer toutes à bloc. Page 84 www.sauder.com/service 420606...
  • Page 85 Faire tourner deux CLIPS POUR CORDON (P81) dans les trous du ÉTAPE 50 DESSUS GAUCHE (A). Fixer le MONTANT DROIT (M) à l’ARRIÈRE DROIT (P). Serrer deux REMARQUE : Le CLIP DE CORDON est utilisé pour maintenir le EXCENTRIQUES ESCAMOTABLES. cordon contre le DESSUS. 420606 www.sauder.com/service Page 85...
  • Page 86 Fixer le MONTANT DE LA TABLETTE DE CLAVIER (H) au DESSUS Fixer les CONSOLES EN MÉTAL sur le DESSOUS DROIT (O) GAUCHE (A). Serrer deux EXCENTRIQUES ESCAMOTABLES. à l'EXTRÉMITÉ DROITE (Q). Utiliser deux GRANDES VIS TÊTE GOUTTE DE SUIF 13 mm (S15). Page 86 www.sauder.com/service 420606...
  • Page 87 Serrer les vis après avoir ajusté. Pour ajuster la PORTE vers l'intérieur où vers l'extérieur (profondeur), desserrer la vis de montage un tour et déplacer la PORTE vers l'intérieur ou vers l'extérieur. Serrer la vis de montage après avoir ajusté. 420606 www.sauder.com/service Page 87...
  • Page 88 Répéter cette étape pour les autres tiroirs comme l'indique REMARQUE : Prière de lire les informations importantes sur la le schéma. sécurité figurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. Page 88 www.sauder.com/service 420606...

  • Page 89: Lista De Partes

    EXTREMO IZQUIERDO ..........1 40BA RIEL DE EXTENSIÓN ..........2 necesita ponerse en DORSO IZQUIERDO ..........1 40BC CORREDERA DE EXTENSIÓN ......2 contacto con Sauder en FONDO IZQUIERDO ..........1 CORRIMIENTO DE ARCHIVERO.....2 cuanto a esta unidad, PARAL IZQUIERDO .............1 B17 VARILLA DE ARCHIVERO ........2 refiérase al número...
  • Page 90 NOTA: Las CORREDERAS DE EXTENSIÓN se utilizarán más tarde Fije los SOPORTES DE METAL sobre el FONDO IZQUIERDO (D) para el ESTANTE DE TECLADO. al EXTREMO IZQUIERDO (B). Utilice dos TORNILLOS GRANDES DE CABEZA REDONDA de 13 mm (S15). Page 90 www.sauder.com/service 420606...
  • Page 91 Utilice tres TORNILLOS DE CABEZA PLANA de 51 mm (S48). Atornille cuatro BIELAS DE EXCÉNTRICO (F16) en el NOTA: Debe apretar cada TORNILLO unas vueltas antes de EXTREMO DERECHO (Q). apretar cualquier tornillo firmemente. Empuje cuatro EXCÉNTRICOS ESCONDIDOS GRANDES (F9) en el EXTREMO DERECHO (Q). 420606 www.sauder.com/service Page 91...
  • Page 92 DERECHO (J) al PANEL SUPERIOR IZQUIERDO (A). Utilice cuatro NOTA: Debe apretar cada TORNILLO unas vueltas antes de apretar cualquier tornillo firmemente. TORNILLOS DE CABEZA REDONDA de 16 mm (S118). NOTA: Debe apretar cada TORNILLO unas vueltas antes de apretar cualquier tornillo firmemente. Page 92 www.sauder.com/service 420606...
  • Page 93 PANEL SUPERIOR IZQUIERDO (A). PASO 50 NOTA: Se utiliza la GRAPA DE CABLE para mantener el cable del Fije el PARAL DERECHO (M) al DORSO DERECHO (P). Apriete contra el PANEL SUPERIOR. dos EXCÉNTRICOS ESCONDIDOS. 420606 www.sauder.com/service Page 93...
  • Page 94 Fije el PARAL DE TECLADO (H) al PANEL SUPERIOR IZQUIERDO (A). Apriete dos EXCÉNTRICOS ESCONDIDOS. Fije los SOPORTES DE METAL sobre el FONDO DERECHO (O) al EXTREMO DERECHO (Q). Utilice dos TORNILLOS GRANDES DE CABEZA REDONDA de 13 mm (S15). Page 94 www.sauder.com/service 420606...
  • Page 95 Para ajustar la PUERTA hacia atrás o hacia adelante (profundidad), afloje el tornillo de montaje una vuelta y mueva la PUERTA hacia el interior o hacia el exterior según sea necesario. Apriete el tornillo de montaje después de hacer los ajustes. 420606 www.sauder.com/service Page 95...
  • Page 96 APLICACIONES (P80) y aplique las sobre cada EXCÉNTRICO ESCONDIDO visible. NOTA: Por favor, lea las páginas de atrás del folleto de instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Limpiar con un trapo húmedo. Seque con un paño. Page 96 www.sauder.com/service 420606...
  • Page 97 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 420606 www.sauder.com/service Page 97...
  • Page 98 Además, el peso soportar un televisor. diseñadas para soportar un televisor. y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 98 www.sauder.com/service 420606...

  • Page 99: Year Limited Warranty

    à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
  • Page 100 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.

Table of Contents