Robe SVOPATT User Manual
  1. Manuals
  2. Brands
  3. Robe Manuals
  4. Lighting Equipment
  5. SVOPATT
  6. User manual
Robe SVOPATT User Manual

Robe SVOPATT User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
QR code for user manual
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SVOPATT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Robe SVOPATT

Summary of Contents for Robe SVOPATT

  • Page 1 QR code for user manual Version 1.0...

  • Page 2: Table Of Contents

    4. SVOPATT Driver installation ..................10 4.1 Rigging the SVOPATT driver ..................10 4.2 Connection the SVOPATT Driver to mains ............... 12 5. Connecting the SVOPATT to the SVOPATT Driver ............ 12 6. SVOPATT Driver DMX operation ................. 14 7. Ethernet connection ..................... 15 8.

  • Page 3: Safety Instructions

    SWOPATT. Do not allow anything to rest on the power cord of the SVOPATT Driver. Do not locate this fixture where the power cord may be damaged.
  • Page 4 Always use a secondary safety wire when rigging the SVOPATT and the SVOPATT Driver. Make sure that the area below the installation place is blocked when rigging, de-rigging or servicing the SVOPATT. The SVOPATT and SVOPATT driver become hot during operation. Allow them to cool approximately 30 minutes prior to manipulate with them.

  • Page 5: Description Of The Fixture

    2 - LED modules (9x) 3 - LED data IN (4-pin XLR) 4 - LED power IN (Amphenol C016) 5 - Mounting bracket SVOPATT Driver 1 - Clamp 10 - Ethernet IN (RJ45) 2 - Omega adaptor 11 - Ethenet OUT (RJ45)

  • Page 6: Svopatt Installation

    The SVOPATT has to be rigged on the truss only, it cannot stay directly on the floor as the air flow through air vents on the side of the fixture would be reduced.
  • Page 7 (decoration articles, etc.) in a distance of min. 1 m. CAUTION! Use two or three appropriate clamps to rig the SVOPATT on the truss. Make sure that the SVOPATT is fixed properly! Ensure that the structure (truss) to which you are attaching the SVOPATT is secure.
  • Page 8 1. Bolt two clamps (1) to the Omega adaptors (2) with M12 bolt and lock nut through the holes in the Omega adaptors. 2. Fasten the Omega adaptors on the SVOPATT housing by inserting quick-lock fasteners of Omega adaptors into the holes in SVOPATT housing and tighten them fully clockwise.
  • Page 9 Removing mounting bracket from the SVOPATT 1. Place the SVOPATT on a flat surface (e.g. table) and unscrew four Allen head screws (1) on each side of the mounting bracket (2). 2. Remove mounting bracket (2) from the SVOPATT housing.

  • Page 10: Svopatt Driver Installation

    4.1 Rigging the SVOPATT driver The SVOPATT driver has to be rigged to the truss by means of one Omega adaptor with clamp. A structure intended for installation of the fixture(s) must safely hold weight of the fixture(s) placed on it. The structure has to be certificated to the purpose.

  • Page 11: Truss Installation

    1.Bolt clamps (2) to the Omega adaptor CL (1) with M12 bolts and lock nuts through the hole in the Omega adaptor CL. 2.Fasten the Omega adaptor CL on the top cover of the SVOPATT driver by means of two quick-lock fasteners and tighten them fully clockwise.

  • Page 12: Connection The Svopatt Driver To Mains

    5. Connecting the SVOPATT to the SVOPATT Driver 1. Disconnect the SVOPATT Driver from mains. 2. Connect the SVOPATT to the SVOPATT Driver by means of the power cable and data cable. 3. Connect the SVOPATT Driver to mains and make its setting (DMX address, DMX mode,..).
  • Page 13 LED data cable connection LED power cable connection...

  • Page 14: Svopatt Driver Dmx Operation

    ALWAYS DISCONNECT THE SVOPATT DRIVER FROM MAINS BEFORE CONNECTING or DISCONNECTING THE SVOPATT. The SVOPATT Driver is equipped with 5-pin XLR sockets for DMX input and output. Use only a shielded twisted-pair cable designed for RS-485 and 5-pin XLR connectors in order to connect the controller with the fixture or one fixture with another.

  • Page 15: Ethernet Connection

    The Universe is a single DMX 512 frame of 512 channels. The SVOPATT Driver is equipped with 8-pin RJ- 45 sockets for Ethernet connection. Use a network cable cat- egory 5 (with four “twisted” wire pairs) and standard RJ-45 plugs in order to connect the fixture to the network.

  • Page 16: Wireless Dmx Operation

    The wireless DMX version of the fixture is equipped with the wireless DMX/RDM module which has full support for wireless communication protocols at entertainment market. The module is based on well known Lumen- Radio RF technology, with implemented wire interface for connection with Robe products. RF output for MCX interface antenna as standard output.

  • Page 17: Control Menu Map

    9. Control menu map Default settings=Bold print Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Addressing Settings DMX Address 001-512 DMX Preset Mode 1, Mode 2, Mode 3, Mode 4 Mode 5 View selected Preset Ethernet Settings Ethernet Mode Disable ArtNet...
  • Page 18 Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Fixture Position Fixture Temperatures LEDs B.I Temperature Base Temperature LEDs B2 Temperature System Logs Personality DMX Presets Mode 1 Mode 2 Mode 5 View Selected Preset Pixel Control Pixel Mirror Off, On Reset to Default...
  • Page 19 Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Manual Control Reset Functions Zoom Reset Manual Effect Con- Special Functions 0-255 trol White All Zones Fine 0-255 Service Adjust DMX Values Special Functions 0-255 White All Zones Fine 0-255 Calibrations Calibrate colours...

  • Page 20: Control Menu

    10. Control menu The SVOPATT Driver is equipped with the QVGA Robe touch screen with battery backup which allows you to set the fixture´s behaviour according to your needs. The fixture´s menu can be controlled either by the control buttons or directly by touching the icon.

  • Page 21: Tab " Address

    If the whole icon is green, the battery is fully charged while the red icon indicates exhausted battery. The battery charges during fixture operation, its charging lasts cca 6 hours. We recommend that the fixture should be in operation at least 7 hours per week to keep the battery fully charged. If you switch the fixture on and this screen will not appear till 1 minute, switch the fixture off and on again.

  • Page 22: Tab "Information

    In order to reset this counter to 0, touch the text box next to the item "Resettable Hours:" Air Filter - Regular cleaning of the air filter in the SVOPATT driver is very important for the SVOPATT drivere´s life and performance.

  • Page 23: Tab "Personality

    Display System - A display control board in the SVOPATT driver. Module DR - a LEDs driver Module L1 - LEDs control 1 Module L2 - LEDs control 2 Module FAN - Fans control processor SW HW Versions - Select this item to read hardware/software version of the fixture modules: Display System - A display control board in the SVOPATT driver.
  • Page 24 Password Protection - allows to enter password in order to prevent unauthorized person from changing setting of the fixture. Password is set to 7623 and cannot be changed. Reset Web Password - The menu item allows you to reset a password for access to the REAP (default pass- word: 2479, user: robe).

  • Page 25: Tab "Manual Control

    Default Settings - The menu item allows to set all fixture parameters to default (factory) values. 10.4 Tab "Manual Control" Reset Functions - The menu allows you to reset the fixture. Zoom Reset - The item resets the zoom module. Manual Effect control - Use the menu to control all fixture channels by means of the control panel.

  • Page 26: Software Update

    11. Software update For software update of the SVOPATT and SVOPATT driver serves the Robe Toolkit software. The Robe Toolkit is a universal tool for Robe fixtures which includes Device Updater, Library Manager, Device Manager and simple DMX controller. Please see the Toolkit user manual for more details about fixtures update.

  • Page 27: Rdm

    The Ethernet network connection (Local LAN) typically needs to be set to 2.x.x.x address, assuming that no other computer on the network contains such an address while keeping all ROBE fixtures in default IP settings. For more information about REAP options, computer and fixture settings please see the REAP user manual at...

  • Page 28: Error And Information Messages

    14. Error and information messages Errors Error in the fixture is signalled by the yellow warning icon at the bottom line of the screen: Touch the warning icon to display error messages. List of error and information messages: PROC X COMM ERR (e.g. PROC 2 COMM ERR) Internal communication error - some PCB in the fixture is faulty.

  • Page 29: Maintenance And Cleaning

    Note: potential foggy front lens array does not influence function of the fixture and does not subject to complaint. Periodically clean the air filter placed in the SVOPATT driver. This air filter is placed on the front panel under a grille, which is fastened by means of two magnets.

  • Page 30: Technical Specifications

    16. Technical specifications SVOPATT Input voltage: 48 V Max. power consumption : 2400 W Light source: 9 LED modules - each module contains 7 RGBW multichips, middle pixel of each LED module contains white strobe LEDs - individual control of each RGBW pixel...
  • Page 31 Max. number of devices in Ether. IN/Out line:8 Connection with SVOPATT- LED data: Cable Tourflex EU/US wit connectors, 2 meters long Connection with SVOPATT - LED power: Cable OLFLEX Classic with connectors, 2 metres long Maximum surface temperature: 50°C Maximum ambient oper. temperature: 45°C...

  • Page 32: Included Items

    (P/N 99011963) Safety wire 36 kg (P/N 99030100) Upgrade kit CRMX Universal 260 January 29, 2025 Copyright © 2024-2025 Robe Lighting - All rights reserved Specifications are subject to change without notice. Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic...
  • Page 33 DMX protocol SVOPATT (SVOPATT DRIVER) - DMX protocol Version: 1.3 Mode 1-Wash mode, Mode 2- individual LED modules, Mode 3-LED modules+ pixels, Mode 4- Pixel mode, Mode 5-one channel mode 2700K Quick overview of default DMX values for each channel and mode...
  • Page 34 DMX protocol Mode/channel Default DMX value Note Function M.1 M.2 M.3 M.4 M.5 M. 1 M.2 M.3 M.4 M.5 Zoom fine (16 bit) - LED module 9 Red/Cyan (8 bit)- LED module 1 0/255 255/0 Red/Cyan fine (16 bit)- LED module 1 0/255 255/0 Green/Magenta (8 bit)-LED module 1 0/255 255/0...
  • Page 35 DMX protocol Mode/channel Default DMX value Note Function M.1 M.2 M.3 M.4 M.5 M. 1 M.2 M.3 M.4 M.5 White fine (16 bit)-LED module 6 0/255 255/0 Red/Cyan (8 bit)- LED module 7 0/255 255/0 Red/Cyan fine (16 bit)- LED module 7 0/255 255/0 Green/Magenta (8 bit)-LED module 7 0/255 255/0...
  • Page 36 DMX protocol Mode/channel Default DMX value Note Function M.1 M.2 M.3 M.4 M.5 M. 1 M.2 M.3 M.4 M.5 138 40 Green pixel 2 LED module 1 139 41 Blue pixel 2 LED module 1 140 42 White pixel 2 LED module 1 377 279 Red pixel 6 LED module 9 378 280...
  • Page 37 DMX protocol SVOPATT (SVOPATT DRIVER) - DMX protocol Version: 1.3 Mode 1-Wash mode, Mode 2- individual LED modules, Mode 3-LED modules+ pixels, Mode 4- Pixel mode, Mode 5 - one channel mode Mode/channel Type of Function Value control Power/Special functions...
  • Page 38 DMX protocol Mode/channel Type of Function Value control Factory display menu setting: 600Hz Select PWM output frequency of LEDs. Selected PWM frequency can be fine adjusted in 127 steps up/down around selected PWM frequency on the channel below. Corresponding menu item is temporarily overridden. PWM frequency from Display menu (fixture utilizes PWM step...
  • Page 39 DMX protocol Mode/channel Type of Function Value control Reserved Colour Mix control - all LED modules The channel defines relation between color channels Global = Global Colours (CMY/RGBW/ colours, Virtual Colour Wheel, CTO) Pixel = Pixel Colours (RGBW individual pixels) Global colours (Global has priority) step 10-19...
  • Page 40 DMX protocol Mode/channel Type of Function Value control Filter 135 (Deep Golden Amber) 59-60 step 61-62 Filter 136 (Pale Lavender) step 63-64 Filter 137 (Special Lavender) step 65-66 Filter 138 (Pale Green) step Filter 139 (Primary Green) 67-68 step Filter 141 (Bright Blue) 69-70 step Filter 147 (Apricot)
  • Page 41 DMX protocol Mode/channel Type of Function Value control Shutter/ strobe -all RGBW LED modules (without white strobe LEDs) 0 - 31 Shutter closed step 32 - 63 Shutter open step 64 - 95 Strobe-effect from slow to fast proportional 96 - 127 Shutter open step 128 - 143 Opening pulse in sequences from slow to fast proportional...
  • Page 42 DMX protocol Mode/channel Type of Function Value control White (8 bit) - all LED modules If RGBW mode is selected: 0-255 Colour saturation control - coarse 0-100% proportional If CMY mode is selected: 0-255 No function step White (16 bit) - all LED modules 0-255 Colour saturation control - fine proportional...
  • Page 43 Blue LED saturation control 0-100% 0-255 proportional White pixel 7 LED module 9 384 286 White LED saturation control 0-100% 0-255 proportional Copyright © 2024 Robe Lighting s.r.o. - All rights reserved All Specifications subject to change without notice Page 7...

This manual is also suitable for:

Svopatt driver

Table of Contents