Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, troubleshooting, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5. BEFORE FIRST USE..................10 6.
• Children should be supervised to ensure that they do not play with the appliance. • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use water spray and steam to clean the appliance. •...
• If the appliance is installed above a Make sure that there is access to the drawer: mains plug after the installation. – Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug.
• Use only accessories recommended for • Switch off the appliance and let it cool this appliance by the manufacturer. down before cleaning. • Clean the appliance with a moist soft WARNING! cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning Risk of fire and explosion.
3.2 Built-in hobs CAUTION! Only use the built-in hobs after you assemble Do not connect the cable without cable the hob into correct built-in units and work end sleeve. surfaces that align to the standards. One-phase connection 3.3 Connection cable 1.
50 min. min. 500mm 50mm Find the video tutorial "How to install your Electrolux Induction Hob - Worktop installation" by typing out the full name indicated in the graphic below. www.youtube.com/electrolux If the appliance is installed above a drawer, www.youtube.com/aeg...
4.2 Control panel layout Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field On / Off To activate and deactivate the hob. Lock / Child Safety Device To lock / unlock the control panel. Pause To activate and deactivate the function.
Display Description PowerBoost operates. There is a malfunction. + digit OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / resid‐ ual heat. Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates.
signal sounds and the hob deactivates. The indicators appear when a cooking zone Remove the object or clean the control is hot. They show the level of the residual panel. heat for the cooking zones you are currently • the hob gets too hot (e.g. when a using: saucepan boils dry).
Page 12
To activate the function for a cooking up. The display switches between and the zone: touch comes on. counted time (in minutes). To deactivate the function: change the heat To see how long the cooking zone setting. operates: touch to set the cooking zone. The indicator of the cooking zone starts to 6.7 Timer flash.
6.12 Power management To activate the function: touch comes on for 4 seconds. The Timer stays on. If multiple zones are active and the consumed power exceeds the limitation of the To deactivate the function: touch . The power supply, this function divides the previous heat setting comes on.
Page 14
communicator. Speed of the fan is defined 3. Press for 3 seconds. automatically on basis of mode setting and 4. Press a few times until comes on. temperature of the hottest cookware on the hob. You can also operate the fan from the 5.
7. HINTS AND TIPS larger than indicated in "Cooking zones WARNING! specification". Avoid keeping cookware close to the control panel during the Refer to Safety chapters. cooking session. This might impact the functioning of the control panel or 7.1 Cookware accidentally activate hob functions.
Page 16
Heat setting Use to: Time Hints (min) Keep cooked food warm. as neces‐ Put a lid on the cookware. sary 1 - 3 Hollandaise sauce; melt: butter, choco‐ 5 - 25 Mix from time to time. late, gelatine. 2 - 3 Solidify: fluffy omelettes, baked eggs.
The Electrolux cooker hoods that work with this function must have the symbol Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. Cooker hoods with the Hob²Hood function...
Page 18
Problem Possible cause Remedy You did not set the heat setting for Activate the hob again and set the 10 seconds. heat setting in less than 10 seconds. You touched 2 or more sensor fields Touch only one sensor field. at the same time.
10. TECHNICAL DATA 10.1 Rating plate Model EIT614 PNC 949 492 691 00 Typ 61 B4A 00 AA 220 - 240 V / 400 V 2N, 50 - 60 Hz Induction 7.2 kW Made in: Romania Ser.Nr.
Diameter of circular cooking zones (Ø) Left front 21.0 cm Left rear 18.0 cm Right front 14.5 cm Right rear 18.0 cm Energy consumption per cooking zone (EC electric Left front 178.4 Wh/kg cooking) Left rear 174.4 Wh/kg Right front 183.2 Wh/kg Right rear 184.9 Wh/kg...
Need help?
Do you have a question about the EIT614 and is the answer not in the manual?
Questions and answers