Chefman Custom-Temp RJ11-18-CTI-V2-CA Instructions Manual page 9

Quick Start: How to Use the Kettle
How to make tea with the infuser
1.
Place the base on a fl at surface.
2.
Remove the kettle's lid. Remove
the infuser from the lid by
twisting it and sliding it in the
direction indicated on the lid.
3.
Fill the kettle to at least the MIN
line (0.5 litres) and not above
the MAX line (1.8 litres) with cold,
fresh water. Return just the lid to
the pot.
STEP - 1
RJ11-18-CTI-V2-CA_UG_EN_LIVE_032025.indd 9 RJ11-18-CTI-V2-CA_UG_EN_LIVE_032025.indd 9
STEP - 2
4.
Set the kettle on its base and
plug in the unit. The kettle will
beep once and the LED ring
near the kettle's base will light
up in white, meaning it's in
Standby mode.
5.
After 2 seconds, the default
temperature of 100˚C (212˚F) will
display on the screen (after fi rst
use, the kettle will default to your
previously used temperature). To
choose a different temperature,
press the SET TEMP button
repeatedly to toggle through
the available choices (see table
on p. 12). You can also press the
BOIL button to quickly jump to
100˚C/212˚F (full boil). To switch
between Fahrenheit and Celsius,
.press and hold the SET TEMP
button for 3 seconds.
9 9
3/20/25 5:25 PM 3/20/25 5:25 PM