Advertisement
Quick Links
MANDATORY
LEAVE THIS MANUAL WITH OWNER
Read and follow all instructions.
Lift safety can only be ensured if the Cycle
Attachment is installed and operated
according to these instructions.
• FOR SAFETY REASONS
• NEVER
swim alone
• NEVER
use the lift with a dry pool
• NEVER
apply direct water pressure to the electronics
• NEVER
permit children to play on or around the lift
• DO NOT
allow children to use the lift without adult
supervision
READ CAREFULLY
Check entire box and all packing
materials for parts. Before beginning
assembly, read the instructions and
identify parts using the figures and
parts listed in this document.
It is critical that all parts be carefully
inspected prior to installation. If any
damage occurred in transit, Aqua Creek
Products, LLC must be notified within
three days of receipt of unit.
Proper installation cannot be
overstressed, as an improper
installation voids Aqua Creek's warranty
and may affect the safety of the user.
USE THIS MANUAL FOR ALL
AQUA CREEK PRODUCTS' ACCESS LIFTS
CYCLE ATTACHMENT
CATALOG NO. F-019CA
Aqua Creek Products, LLC
9889 Garrymore Lane
Missoula, MT 59808
Toll Free: (888) 687-3552
Local/Intnl: (406) 549-0769
www.aquacreek.com
11/30/2022 1:52:35 PM PAGE - 1
Advertisement
Related Manuals for Aqua Creek Products F-019CA
Summary of Contents for Aqua Creek Products F-019CA
- Page 1 CYCLE ATTACHMENT CATALOG NO. F-019CA USE THIS MANUAL FOR ALL AQUA CREEK PRODUCTS' ACCESS LIFTS MANDATORY LEAVE THIS MANUAL WITH OWNER Read and follow all instructions. Lift safety can only be ensured if the Cycle Attachment is installed and operated according to these instructions.
-
Page 2: Product Components
Aqua Creek Products PRODUCT COMPONENTS ASSEMBLY - CYCLE ATTACHMENT - INV01379 ITEM PART NO. QTY. REV. DESCRIPTION INV02202 WELDMENT - CYCLE ATTACHMENT MAIN FRAME INV01262 PART - CYCLE ATTACHMENT CRANK SPACER INV03215 ASSEMBLY - PEDAL RIGHT W/SHAFT INV03212 ASSEMBLY - PEDAL LEFT... -
Page 3: Product Assembly
Aqua Creek Products PRODUCT ASSEMBLY STEP 01: Remove the 2” square plastic end cap from the front of the chair support tube, front of chair between legs. (FIGURE 01) STEP 02: Slide the Bike Pedal Attachment into the chair support tube. Align one of the leg length adjustment holes with the holes through the chair and the chair support tube. - Page 4 TENSION TENSION Once the Cycle Attachment has been installed onto an Aqua Creek Products’ lift it is ready for use. Make sure to always fasten the safety belt when using the lift. Once in the water, hold onto the hand-grips and pedal normally.
-
Page 5: Warranty
LIMITED ONE (1) YEAR WARRANTY Aqua Creek Products, LLC (a.k.a. Aqua Creek) warrants to the original end user purchaser that products manufactured by Aqua Creek, when properly installed in accordance with assembly and installation instructions and properly used and maintained, shall be free from defects in material and workmanship for a period of one...
Need help?
Do you have a question about the F-019CA and is the answer not in the manual?
Questions and answers