Advertisement
POOL BIKE
9889 Garrymore Ln
Missoula, MT 59808
PART #: F-PWVTB-00
888-687-3552 | +1-406-549-0769
www.aquacreek.com
MANDATORY
LEAVE THIS MANUAL WITH BIKE OWNER
Read and follow all instructions.
• NEVER permit children to play on or around the bike.
Bike safety can only be ensured if the bike is
• Optimal use in water depth of 3.5 to 5 feet (1 to 1.5
assembled and operated according to these
meters).
instructions.
• For safety reasons, NEVER excercise alone in the water.
1
Copyright © 2021 Aqua Creek Products All Rights Reserved
Revised 2/3/21
Advertisement
Table of Contents
Related Manuals for Aqua Creek Products ProWave F-PWVTB-00
Summary of Contents for Aqua Creek Products ProWave F-PWVTB-00
- Page 1 • Optimal use in water depth of 3.5 to 5 feet (1 to 1.5 assembled and operated according to these meters). instructions. • For safety reasons, NEVER excercise alone in the water. Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 2/3/21...
- Page 2 2. SEAT & TRAINING BAR CONNECTION ASSEMBLY 3. 1/4 X 1-3/4 BUTTON HEAD (2) 4. 1/4 FLAT WASHER (4) 5. 1/4 ACORN NUT (2) 6. RUBBER HAND GRIP (2) 7. DIELECTRIC GREASE PACKET Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 2/3/21...
- Page 3 1/4 X 1/2 BUTTON HEAD LOOSEN KNOB Loosen the adjustment knob on the main frame and remove the seat rail assembly from the main frame. REMOVE SEAT RAIL ASSEMBLY LOOSEN KNOB Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 2/3/21...
- Page 4 Attach the training bar assembly to the seat rail using the supplied 1/4” hardware as show below. 1/4 FLAT WASHER (4) 1/4 X 1 3/4 BUTTON HEAD (2) TRAINING BAR ASSEMBLY 1/4 ACORN NUT (2) Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 2/3/21...
- Page 5 Slide the new seat rail assembly into the main frame and tighten the adjustment knob once the desired seat height is reached. INSTALL NEW SEAT RAIL ASSEMBLY TIGHTEN KNOB ONCE DESIRED HEIGHT IS REACHED Copyright © 2021 Aqua Creek Products All Rights Reserved Revised 2/3/21...
- Page 6 NO EVENT SHALL AQUA CREEK’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO AQUA CREEK BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. IN NO EVENT SHALL AQUA CREEK PRODUCTS, LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE.
Need help?
Do you have a question about the ProWave F-PWVTB-00 and is the answer not in the manual?
Questions and answers