Compaq 112726-001 - ProLiant - 6500 Integration Notes page 24

Save this file, HASERVER.INI, in the SYS:\SYSTEM directory. Whenever Server B
enters the recovery state, this script will have NHAS configure Server A to respond to all
client requests to 123.45.67.22.
4. Create a file called FAIL2.NCF on Server B with the following entries (each command is
preceded by remarked comments):
Then on Server B, edit the file HASERVER.INI and modify the FailoverCommand
parameter, under the section [Server.PL7000-2], as shown below:
Save this file, HASERVER.INI, in the SYS:\SYSTEM directory. Whenever Server B
enters the recovery state, this script will have NHAS configure Server B to respond to all
client requests to 123.45.67.11.
5. Create a file called REC1.NCF on Server B with the following entries (each command is
preceded by remarked comments):
Then on Server B, edit the file HASERVER.INI and modify the RecoveryCommand
parameter, under the section [Server.PL7000-2], as shown below:
Save this file, HASERVER.INI, in the SYS:\SYSTEM directory. Whenever Server A
enters the recovery state, this script will have NHAS configure Server A to no longer
respond to client requests to 123.45.67.22.
6. Create a file called REC2.NCF on Server A with the following entries (each command is
preceded by remarked comments):
Then on Server A, edit the file HASERVER.INI and modify the RecoveryCommand
parameter, under the section [Server.PL7000-1], as shown below:
Save this file, HASERVER.INI, in the SYS:\SYSTEM directory. Whenever Server B
enters the recovery state, this script will have NHAS configure Server B to no longer
respond to client requests to 123.45.67.11.
7. Ping Server A with the virtual IP 123.45.67.11 from a client.
Accordingly, the client ping should receive a reply from the server (volume).
0096-0699-A
# adds all secondary IP addresses
add secondary ipaddress 123.45.67.11
# displays all secondary IP addresses
display secondary ipaddress
FailoverCommand=FAIL2.NCF
# adds all secondary IP addresses
del secondary ipaddress 123.45.67.11
# displays all secondary IP addresses
display secondary ipaddress
RecoveryCommand=REC1.NCF
# adds all secondary IP addresses
del secondary ipaddress 123.45.67.22
# displays all secondary IP addresses
display secondary ipaddress
RecoveryCommand=REC2.NCF