Compaq 112726-001 - ProLiant - 6500 Integration Notes page 20

[HAServer]
Server=PL7000-2
Server=PL7000-1
NWLinkTimeout=30
FailoverDelay=30
Broadcast=Off .
Rollback=Automatic
DiskLink=258E5776
[Server.PL7000-2]
Volume=VOL2
Volume=SYS
PrimaryLicense=20614660
RecoveryCommand=REC1.NCF
FailoverCommand=FAIL1.NCF
CostandbyCommand=CO2.NCF
DiskLinkSector=0
SecondaryLicense=60022796
[Volume.PL7000-2.VOL2]
Shared=True
Mounted=True
0096-0699-A
This identifies the NetWare Servers in the NHAS Cluster.
This identifies the NetWare Servers in the NHAS Cluster.
This sets the NWLink timeout value before NHAS triggers the link
down. Keep in mind that this value is also used when the disk and
direct links fail.
This specifies the delay time of NHAS after the links are down to
failover the disk volumes to the surviving cluster node.
Enabling this will broadcast a network message informing users the
status of the servers in the cluster when a failover or recovery
happens.
Setting this value to manual will disable automatic failback of the
volumes should the server that went down go back online.
This is a unique number used for quorum arbitration by the disk link.
Note that if this value is accidentally changed or erased, we
recommend that you reinstall NHAS.
This subsection details the information for this particular server,
PL7000-2.
Volume settings identify which volumes should remain exclusive to this
server.
Volume settings identify which volumes should remain exclusive to this
server.
This License Number is used as the main Server License for this node
during normal operating conditions.
By specifying a command or an executable script, when a server
enters the RECOVERY STATE, i.e. has failed, it processes the
commands listed here. This specified command should call a file that
contains all commands necessary for a successful IP failover.
By specifying a command or an executable script, when a server
enters the FAILOVER STATE, i.e. is taking over for the other failed
server, it processes the commands listed here. This specified
command should call a file that contains all commands necessary for a
successful IP failover.
By specifying a command or an executable script, when a server
enters the COSTANDBY STATE, i.e. Normal condition, it processes
the commands inputted here. This specified command should call a
file that contains all commands necessary for a successful IP failover.
This specifies the segment of the disk used for quorum arbitration by
the Disk Link.
This License Number is used to append the other Server's License
should a failover happen.
This subsection details the information for this particular server,
PL7000-2, in respect to Volume 2.
Setting the value to false will disable the ability for a drive to failover.
Setting the value to false will disable NHAS from automatically
mounting this volume.