Compaq 112726-001 - ProLiant - 6500 Integration Notes page 22

[Volume.PL7000-1.VOL1]
Shared=True
Mounted=True
HotfixIdentifier=258E576C
MountCommand=
DismountCommand=
[Volume.PL7000-1.SYS]
Shared=False
Mounted=True
HotfixIdentifier=258E5780
MountCommand=
DismountCommand=
Sample IP Failover
As the clearest method of explaining the IP failover procedure, the following sample is a
walkthrough of a failover performed during a client ping. Hopefully, this example will shed light
on the relationship between the HASERVER.INI parameters and the operation of the cluster.
The following example describes a series of files that explain how to implement IP failover
between the two servers in the cluster. The script files that follow should be used as a reference
when creating your own custom IP failover script files.
Scenario
IP address of Server A
IP address of Server B (PL7000-2): 123.45.67.2 with VOL2: on shared disk
Virtual IP address of VOL1: 123.45.67.11
Virtual IP address of VOL2: 123.45.67.22
Client IP address: 123.45.67.5
0096-0699-A
This subsection details the information for this particular server,
PL7000-1, in respect to Volume 1.
In order for volumes to failover properly, this must be set to true
Setting the value to false will disable the ability for drive to failover.
Setting the value to false will disable NHAS from automatically
mounting this volume.
This value, derived from the partition time stamp NetWare creates, is
used to recognize volumes for NHAS.
By specifying a command or an executable script, when a server
mounts this particular volume, it processes the commands inputted
here.
By specifying a command or an executable script, when a server
dismounts this particular volume, it processes the commands inputted
here.
This subsection details the information for this particular server,
PL7000-1, in respect to the SYS: volume.
This value should stay false.
Setting the value to false will disable NHAS from automatically
mounting this volume.
This value, derived from the partition time stamp NetWare creates, is
used to recognize volumes for NHAS.
By specifying a command or an executable script, when a server
dismounts this particular volume, it processes the commands inputted
here.
By specifying a command or an executable script, when a server
dismounts this particular volume, it processes the commands inputted
here.
(
PL7000-1): 123.45.67.1 with VOL1: on shared disk