Installation Instructions; Part 1: Installing Microsoft Sbs 2000 - Compaq 108164-003 - ProLiant - 800 Integration Notes

Microsoft small business server 2000 installation instructions for compaq prosignia and proliant servers

Hide thumbs Also See for 108164-003 - ProLiant - 800:

Table of Contents

Microsoft Small Business Server 2000 Installation Instructions for Compaq Prosignia and ProLiant Servers

Table 7. Installing CSP for Windows 2000 using SmartStart 4.70 release CD-ROM or later

Procedures

Installing the CSP for

Windows 2000 from the

SmartStart and Support

Software CD-ROM

Installation Instructions

The installation instructions are comprised of two parts: (1) installing Microsoft SBS 2000, and

(2) installing and configuring modem and network interface controllers (NIC) with Microsoft

SBS 2000. Each part divides the procedures into tasks, providing detailed information and check

boxes to guide you through the installation process.

This section provides the steps you must perform to begin the Microsoft SBS 2000 installation.

The procedures detailed in Table 8 guide you through the necessary steps if you choose to install

without a modem or with a modem.

Note: The following steps assume that you have already created the driver diskette from the

CSP for Windows 2000 components for your primary storage controller. If you have not created

the diskette, refer to the procedures listed in Table 6. Creating Compaq CSP for Windows 2000

using SmartStart release 4.70 CD-ROM or later.

145Z-0301B-WWEN

Steps

Insert the SmartStart and Support Software CD-ROM into the CD-

ROM drive once Microsoft SBS 2000 installation completes.

Select the I Agree check box and click OK.

Select to install the Compaq Support Paq and click OK when the

System Utilities interactive window appears. This action launches the

Compaq Remote Development Utility.

Select the Install button on the Compaq Remote Deployment Utility to

install all the components applicable to your server.

Table of Contents