ENGLISH (Original instructions) SPECIFICATIONS Model: DDF485 Drilling capacities Steel 13 mm Wood 38 mm Fastening capacities Wood screw 6 mm x 75 mm Machine screw No load speed High (2) 0 - 1,900 min Low (1) 0 - 500 min Overall length 164 mm or 169 mm (Country specific)
Some material contains chemicals which may NOTE: The declared vibration total value(s) has been be toxic. Take caution to prevent dust inhala- measured in accordance with a standard test method tion and skin contact. Follow material supplier and may be used for comparing one tool with another. safety data.
It will also void the Makita warranty for the Makita tool and charger. Only for battery cartridges with the indicator Press the check button on the battery cartridge to indi- Tips for maintaining maximum cate the remaining battery capacity.
Page 7
► Fig.2: 1. Indicator lamps 2. Check button speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Indicator lamps Remaining NOTE: The tool automatically stops if you keep pull- capacity ing the switch trigger for about 6 minutes. Lighted Blinking Lighting up the front lamp...
the speed change lever to display "2" for high speed If the tool speed is coming down extremely during the or "1" for low speed but high torque. Be sure that the operation with display "2", push the lever to display "1" speed change lever is set to the correct position before and restart the operation.
NOTE: When driving wood screw, pre-drill a pilot hole repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service 2/3 the diameter of the screw. It makes driving easier Centers, always using Makita replacement parts.
Page 10
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 10 ENGLISH...
Need help?
Do you have a question about the DDF485ZJ and is the answer not in the manual?
Questions and answers