5.5.6
Hardware Monitor
Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Smart Q-Fan Control
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU / MB
temperature. Select Ignored if you do not wish to display the detected temperature.
CPU Fan Speed [xxxxRPM] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignored if you do not wish to display the
detected speed.
Smart Q-Fan Control [Enabled]
Allows you to enable or disable the Smart Q-Fan control.
Configuration options: [Disabled] [Enabled]
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
5-28
[45ºC/113ºF]
[41ºC/105.5ºF]
[1190RPM]
[Enabled]
[ 1.232V]
[ 3.344V]
[ 5.107V]
[12.267V]
CPU Temperature
Chapter 5: BIOS setup