Table of Contents
Advertisement
Click Insert > Multiple driver folder to
7.
select the AHCI folder, then click OK.
Select the driver path and click OK. Select
Intel(R) ICH10R SATA AHCI Controller
and click OK, then click Next. From the
confirmation message, click Yes. When
the process is finished, click Next.
8.
From the Mode dropdown list, select
Create Image and click the Make
ISO button, then select the place
you what to save this ISO file to
and key in a name for the ISO file.
Click Save when done. When nLite
is finished creating the ISO image.
Click Next.
Click Finish to exit nLite.
9.
10. Enable AHCI mode in BIOS settings, before installing Windows
Press <DEL> during the Power-On Self-Test (POST) to enter the BIOS setup.
From the Main menu, select Configure SATA as, then press <Enter>. Select
AHCI and press <Enter>. Press <F10> to save changes and exit BIOS setup.
System Time
System Date
SATA1
SATA2
SATA3
SATA4
Configure SATA as
System Information
A-6
[04: 49 : 02]
[Wed 07/09/2008]
: [Not Detected]
: [Not Detected]
: [Not Detected]
: [Not Detected]
[AHCI]
XP.
®
Options
IDE
AHCI
Appendix
Advertisement
Table of Contents
