KeeNetic STARTER KN-1121 Quick Start Manual

KEENETIC
STARTER
Quick Start Guide
N300 Mesh Wi-Fi Router
with a 3-Port Smart Switch
Model: KN-1121
Installing Your Keenetic Starter
Position your Keenetic Starter (hereinafter 'Keenetic device') within
1.
cable lengths of Ethernet and power outlets. Place your Keenetic
device in an unenclosed space for better wireless coverage. Connect
your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
Сonnect a mobile device to your Keenetic device via Wi-Fi. The default
2.
Wi-Fi name (SSID) and the Wi-Fi password are printed on your Keenetic
device's back label along with a QR code that will automatically connect
your mobile device to the Keenetic device's Wi-Fi when scanned.
Alternatively, сonnect a computer to the gray Ethernet port on your
Keenetic device using the included Ethernet cable.
Once connected, an Initial Setup Wizard window will appear on your
3.
mobile device / computer. If the Wizard does not appear, using
a browser go to my.keenetic.net and follow the setup instructions.
Note: If the Initial Setup Wizard still doesn't appear, please refer
to the Frequently Asked Questions section below.
For technical support and other information,
please visit
support.keenetic.com
1
2
10:00
Welcome
to the Initial
Setup Wizard
Run wizard
3