Page 1
User Guide Learn more about the features of your Keenetic at help.keenetic.com...
Page 2
By default, this port is designed for plugging the Internet cable from your ISP. Button (Reset) If you switch the Keenetic into one of the additional modes: «Access point», To reset the administrator password and all «Repeater», or «Adapter», — this port along user settings for all modes, press this button with ports «1», «2», and «3»...
Page 3
Off — the Wi-Fi network is disabled. Indicator (Status) Flashing frequently — indicates data transfer. On — the Keenetic is ready for operation. Flashing slowly — a WPS session is in progress. Off — the Keenetic is turned off. Button ...
Page 4
Configuring with Keenetic web interface The Keenetic must be powered via the cable, using it to connect port 1 of the Keenetic supplied power adapter and ready for to the computer’s Ethernet adapter. work, with the indicator steady on. To access the Keenetic web interface open Connect the computer to the Keenetic.
Connect the Ethernet cable from your address of the Keenetic during connection setup. ISP to the «0» port on the Keenetic. If you have an IPTV set-top box or a TV that can If the contract with your broadband provider...
Keenetic using a network cable. You can use the connection via DSL or GPON as In order to use all the features of the Keenetic, your primary Internet connection or as a backup the modem must be in bridge mode. If the one in addition to other connections.
How to achieve maximum Wi-Fi speed Keenetic City is an AC750 Dual Band Smart Wi-Fi and tablets are equipped with a 1x1 type Wi-Fi Router. It provides link rate of 433 Mbps in the adapter, they will connect at rates up to 72 Mbps...
5 GHz band, but keep in mind Keenetic by the window overlooking the part of that the network range in it is physically the grounds where you plan to use Wi-Fi most of smaller and is weakened by any obstacles.
Page 10
⬛ in accordance with the instruction manual; transportation, except when the the product stopped working as a result ⬛ transportation was carried out by an of installing software not distributed through authorized Keenetic service center. Keenetic customer support or website;...
Page 11
When you first connect to the 50/60Hz Internet the service tag is automatically recorded Ethernet cable ⬛ in the Keenetic Support Center log. By using the User Guide ⬛ Keenetic City, you agree with right of Keenetic Limited to automatically receive information...
Page 12
Simplified EU declaration of conformity distribution of this document or any part thereof Keenetic Limited hereby declares that this device without the prior written permission of Keenetic is in compliance with Directive 2014/53/EU. Limited. is prohibited, except for cases permitted The full text of the EU declaration of conformity by copyright law.
Need help?
Do you have a question about the CITY and is the answer not in the manual?
Questions and answers