KeeNetic KN-3010 Quick Start Manual

Quick Start Guide
AC1200 Dual Band Mesh Wi-Fi Gigabit Router/Extender
with Dual Core CPU and a 5-Port Gigabit Smart Switch
Model: KN-3010
Creating a New or Extending
an Existing Network
Keenetic routers deliver reliable, continuous, and secure Wi-Fi throughout your
home. Starting with one main Keenetic router, as your demands increase, you
can add more Keenetic devices to act as Wi-Fi extenders to create a centrally
managed multi-node Mesh Wi-Fi System.
If you are creating a new network and this Keenetic Speedster (hereinafter
'Keenetic device') is going to be your Main Router, go to Section A.
If you are extending an existing network and this Keenetic device
is to act as a Wi-Fi extender, go to Section B.
B
4
10:00
Mesh Wi-Fi
System
Acquire
5
A
1
A B
0 1 2 3 4
3
10:00
Welcome to
Your Keenetic
Next
4
1
A B
0 1 2 3 4
3
6
A. Connecting Your Keenetic
Speedster to the Internet
1 Set the physical Operating Mode switch located on the side panel to position
H
A — Router Mode.
2
2 Position your Keenetic device within cable lengths of Ethernet and power
outlets. Place your Keenetic device in an open area for better wireless
coverage. Connect your Keenetic device to a power source. Check that both
the Status LED C and Wi-Fi LED D are illuminated and not blinking.
3 Сonnect a mobile device to your Keenetic device via Wi-Fi. The default Wi-Fi
name (SSID) and Wi-Fi password are printed on your Keenetic device's back
label along with a QR code that will automatically connect your mobile
device to the Keenetic device's Wi-Fi when scanned. Alternatively, сonnect
a computer to any of the gray Ethernet ports on your Keenetic device
using the included Ethernet cable.
4 Once connected, an Initial Setup Wizard window will appear on your mobile
device / computer. If the Wizard does not appear, using a browser go to
my.keenetic.net and follow the setup instructions.
Note: If the Initial Setup Wizard still doesn't appear, please refer
to the Frequently Asked Questions section below.
B. Extending Your Existing Network
Coverage
1 On the Keenetic device you wish to be a Mesh Wi-Fi Extender, set the Operating
Mode switch located on the side panel to position
2 Connect your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
3 Make sure your Keenetic Main Router is active and has an Internet connection.
Connect the 'Extender' Keenetic device to your Keenetic Main Router using an
Ethernet cable (as supplied). Alternatively you can connect Keenetic devices
wirelessly by placing them near to each other and simultaneously pressing the
Wi-Fi buttons D on both devices. Check that the Internet LED A on the
'Extender' is illuminated.
2
4 Сonnect a mobile device / computer to your Keenetic Main Router network.
5 Launch a web browser and go to my.keenetic.net and log in to the Main Router
or launch the Keenetic Mobile Application. Then choose the Wi-Fi System
section and click Acquire to add an extender candidate to your Wi-Fi System.
Wait for the process to complete.
6 Disconnect the acquired Extender from the Main Router and place the Extender
where you want in your home to expand your Wi-Fi network. A Keenetic Mesh
Wi-Fi System supports both wireless and wired connections between the Main
Router and Extenders. To maximize your network performance use wired
connections where possible. The Internet LED A on the Extender will illuminate
when it has connected successfully to your network.
For technical support or other information, please visit
help.keenetic.com
I
B — Extender Mode.