Page 2
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Information for the medical devices manufacturer ......vi Safety information ..................vii Care and Cleaning ..................ix Disposing of your old product ..............x ASUS contact information ................x Takeback services ..................xi Chapter 1: Product introduction Welcome! ..................1-1 Package contents ................. 1-1 Monitor introduction ..............
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
Product description Intended use This monitor is intended to be used for viewing general purpose medical images by medical practitioners. Contraindications This device is not intended for use in direct diagnostic and therapeutic interventional radiology. Intended users This device is intended for use by trained medical practitioners and medical personnel.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
Page 8
• To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective earth. • Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked “Hospital Only” or “Hospital Grade. •...
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. AEEE yönetmeliğine uygundur Care and Cleaning •...
Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer.
Takeback services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.
Thank you for purchasing the ASUS OLED monitor! The latest widescreen OLED monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual...
Monitor introduction 1.3.1 Front view Menu Close Brightness Pixel Pixel Aspect Aspect Control Ctrl. Monochrome DICOM Aspect Pixel Ctrl. Aspect Pixel Ctrl. 4 3 2 Menu (5-way) button: • Enter the OSD menu. • Enact the selected OSD menu items. •...
Page 14
The default setting of Human sensor is “Off”. User can activate this function through OSD settings. • To configure the setting, go to the Setting > Human Sensor menu. ASUS MH3281A OLED Monitor...
1.3.2 Back view Earphone jack: This port connects to an earphone. HDMI ports: These ports are for connection with an HDMI compatible device. DisplayPort in: This port is for connection with a DisplayPort compatible device. The default setting of DisplayPort Stream in the OSD menu is DisplayPort 1.2. To configure the setting, go to Setting >...
1.3.3 Color Calibration Users can use the ASUS tool with the color sensor that is embedded on the top of the monitor for color calibration. Ensure that the protective film on the color sensor has been removed before using the color sensor for calibration.
(Figure 3) • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • When the panel screen is facing down, be careful not to damage the Menu (5-way) button. ASUS MH3281A OLED Monitor...
Attaching the stand (arm/base) To assemble the stand: Carefully take the monitor out of the box. Hold the monitor firmly and do not press on the panel screen when lifting to avoid any accidental damage (Figure 1). Place the monitor face down on the table, and then use a paper clip (or a similar object) to remove the rubber cushions in the screw holes and remove the mini stands (Figure 2).
Page 19
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • When the panel screen is facing down, be careful not to damage the Menu (5-way) button. Shall use VESA standardized mounting pad in mounting application. ASUS MH3281A OLED Monitor...
Detaching the stand (for VESA wall mount) The detachable stand of this monitor is specially designed for VESA wall mount. To detach the stand: Place the monitor face down on the table, remove the screws that fix the arm to the monitor, and then remove the arm (Figure 1). Install the mini stands (Figure 2).
Page 21
• No adjustable VESA arm type wall mount device to be permitted for product installation. (The color calibration sensor always oriented on top or sides of the screen) ASUS MH3281A OLED Monitor...
Installing the cable clips Use the cable clips to manage the connected cables. To install the cable clips: Using a paperclip (or similar item), remove the rubbers covering the screw holes (Figure 1). By aligning the screw hole (marked by blue line) and the guide pin (marked by the...
You can adjust the monitor’s angle from -5˚~+23˚, and it allows 30˚ swivel adjustment from either left or right. You can also adjust the monitor’s height within 130 mm. (Tilt) (Swivel) -5°~+23° 30° 0° 30° (Height adjustment) 130 mm ASUS MH3281A OLED Monitor...
Pivoting the monitor Lift the monitor to the highest position. Tilt the monitor to its maximum angle. Pivot the monitor to the angle you need. 90˚ -5°~+23° 90˚ It is normal that the monitor slightly shakes while you adjust the viewing angle. The OSD menu item will automatically rotate when the monitor rotates.
Make sure your computer is installed with the latest Windows 10/11 operating system. That will enable the USB ports on the monitor to work. » Downstream: Use an USB cable to connect your device with the monitor's USB Type-A port. ASUS MH3281A OLED Monitor...
When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu. 2.7 Turning on/off the monitor Set the DC switch to ON position (A), and then press the button (B). The Stand-by indicator lights up in white to show that the monitor is ON. Safely shutdown the monitor: Press the button (B) turn off the screen, and then set the DC switch to OFF...
Menu (5-way) button up/down to change the settings of the selected function. To exit and save the OSD menu, press the Close button or move the Menu (5-way) left repeatedly until the OSD menu disappears. To adjust other functions, repeat steps 1-3. ASUS MH3281A OLED Monitor...
• User Mode 1/User Mode 2: You can save one or two ASUS Calibration profiles as User Mode 1/User Mode 2 after executing ASUS Calibration and then have quick access here.
Page 29
Below tables show the default configurations for each ASUS Preset mode: Function Native sRGB DICOM_0lux DICOM_50lux Color Temp. 6500K Fixed (6500K) 7500K 7500K fixed Brightness 80nits Disable Disable Contrast (Gray out) (Gray out) Sharpness Enable (0) Enable (0) Enable (0)
Page 30
Image Set the image related setting from this menu. Image ASUS MH3281A Mode HDMI-1 3840x2160@ 60Hz Native Mode Brightness Contrast Color Temp. Gamma Sharpness RGB Tuning Monochrome Darkness • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100.
Page 31
D 3MP: Only support 2048 x 1536. D 5MP: Only support 2560 x 2048. D 6MP: Only support 3280 x 2048. D 8MP: 3840 x 2160 (default). Also support 4096x2160 / 1920x2160 / 3M / 6M. ASUS MH3281A OLED Monitor...
Page 32
Self Calibration Perform standalone calibration to ensure color accuracy every working period. To maintain the accuracy of the schedule, ensure that the DC switch is always set to ON position. Self Calibration ASUS MH3281A Mode Native Mode HDMI-1 3840x2160@ 60Hz...
Page 33
Target Warm Up Manual Execution Auto Execution • Manual Execution: Manually perform the standalone calibration. Select “Yes” to start. Self Calibration ASUS MH3281A Mode HDMI-1 3840x2160@ 60Hz Native Mode Target Warm Up Manual Execution Auto Execution ASUS MH3281A OLED Monitor...
Page 34
• Auto Execution: Allow the system to automatically perform standalone calibration for your personalized time setup. Self Calibration ASUS MH3281A Mode Native Mode HDMI-1 3840x2160@ 60Hz Target Warm Up Manual Execution Auto Execution . . . » Clock: Set the current time.
Page 35
Auto Execution will be disabled when “Off” is selected. Self Calibration ASUS MH3281A Mode HDMI-1 3840x2160@ 60Hz Native Mode Target Clock Warm Up Appointment Single Manual Execution Routine Everyday Auto Execution Every 7 days Every 14 days Every 28 days ASUS MH3281A OLED Monitor...
Page 36
DisplayPort USB Type-C • Color Setting: Selects an individual ASUS Preset Mode for the selected PIP/PBP source. (Up to 2 ASUS Preset modes can be chosen) • PIP Size: Adjusts the PIP size to Small, Middle, or Large. (Only available...
Page 37
• Customization: You can decide the frame size by moving the Menu (5-way) button up/down/left/right. You can press the Menu (5-way) button for longer than 3 seconds to switch the measurements between millimeter and inch. 3-11 ASUS MH3281A OLED Monitor...
Page 38
Eye Care Protect your eyes with ASUS EYE CARE Monitors. The latest ASUS monitors feature exclusive Blue Light Filter and Flicker free technologies to keep your eye healthy. Refer to https://www.asus.com/Microsite/display/eye_care_technology/ Eye Care ASUS MH3281A Mode HDMI-1 3840x2160@ 60Hz Native Mode...
Page 39
Color Augmentation: Adjusts the color augmentation for the red, green, blue, or yellow color. Input Select In this function, you can select your desired input source. Input Select ASUS MH3281A Native Mode HDMI-1 3840x2160@ 60Hz HDMI-1 HDMI-2 HDMI-3 DisplayPort USB Type-C Auto Detection 3-13 ASUS MH3281A OLED Monitor...
Page 40
Setting Allows you to adjust the system. Setting ASUS MH3281A Native Mode HDMI-1 3840x2160@ 60Hz Power Saving OSD Setup Language Sound DisplayPort Stream Key Lock Power Indicator Ambient Effect • Power Saving: Specifies the power saving setting. » Normal Level: Allows the USB downstream ports/USB Type-C ports to charge external devices when the monitor enters power saving mode.
Page 41
Please do not put any object too close to the Human Sensor to avoid any interference. • Information: Shows the monitor information. • All Reset: Selects “Yes” to revert all settings to the factory default mode. 3-15 ASUS MH3281A OLED Monitor...
Page 42
10. Shortcut Defines the functions for Shortcut 1 and 2 buttons. Shortcut ASUS MH3281A HDMI-1 3840x2160@ 60Hz Native Mode Shortcut 1 Shortcut 2 • Shortcut 1/Shortcut 2: Selects a function for Shortcut 1 and 2 buttons. When a certain function is selected or activated, your shortcut key may not support.
• Ensure that the HDMI/DisplayPort/Type C cable is properly connected to the monitor and the computer. • Adjust the volume settings of both your monitor and HDMI/DisplayPort/Type C device. • Ensure that the volume setting of the device is correct. 3-17 ASUS MH3281A OLED Monitor...
Page 45
28.125 1920x1080p 33.75 56.25 67.5 37.5 1280x720p 640x480p 31.469 * Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above. 3-19 ASUS MH3281A OLED Monitor...
+90˚ ~ -90˚ (Please see 2.5 Adjusting the monitor on Pivot page 2-7 for more detail.) Height Adjustment 130mm Kensington lock Power On: 23.2 W** (Typ.) Power consumption Standby: < 0.5 W Power Off: 0.3 W (Switch off) ASUS MH3281A OLED Monitor...
Page 47
Monitor input Rating 24 Vdc, 6.6A Temperature (Operating) 0˚C ~ 40˚C Temperature -20˚C ~ +60˚C (Storage & Transportation) Humidity (Operating) 5%~90% Humidity 5%~90% (Storage & Transportation) Pressure (Operating) 70K-106KPa Pressure 18Kpa-101Kpa (Storage & Transportation) 735.4mm x 466.9mm x 54.4mm (monitor only) 735.4mm x 489.1mm x 162.6mm (with mini stand) Dimension (W x H x D) 735.4mm x 626.9mm x 245mm (with stand, highest)
Power Power Adapter Vendor Adapter Technology Co., Ltd. Power Adapter Model Number ATM160T-P240 I/P: 100-240V~, 50-60Hz, 1.8-0.9A; Power Adapter Input O/P: 24Vdc, 6.6A The power adapter is a forming part of the medical Remark device ASUS MH3281A OLED Monitor...
Follow instructions for use Direct Current (DC) Alternating current (AC) DC Switch; Dot: Power On; Blank: Power Off Stand-by WEEE Manufacturer China RoHs Japan RoHs Serial Number Medical Device IMPORTANT: Information that you MUST follow to complete a task. ASUS MH3281A OLED Monitor...
Page 50
Symbols Definition NOTE: Tips and additional information to aid in completing a task. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. DisplayPort Transport &...
The user of this device should assure that it is used in such an environment. 5.2.1 Electromagnetic interference Emissions test Compliance RF emissions Group 1 CISPR 11 RF emissions Class B CISPR 11 Harmonic emissions Class D IEC 61000-3-2 Voltage Fluctuations / Flicker Emission Complies IEC 61000-3-3 ASUS MH3281A OLED Monitor...
Need help?
Do you have a question about the MH3281A and is the answer not in the manual?
Questions and answers