Subscribe to Our Youtube Channel
Related Manuals for Russell Hobbs 25090ZA
Summary of Contents for Russell Hobbs 25090ZA
- Page 1 INSTRUCTIONS AND WARRANTY MODEL 25090ZA RUSSELL HOBBS ONE TEMP STEAM, SPRAY, DRY IRON...
- Page 2 Congratulations on purchasing our Russell Hobbs One Temp Steam, Spray, Dry Iron. Each unit is manufactured to ensure safety and reliability. Before using this appliance for the first time, please read the instruction manual carefully and keep it for future reference.
-
Page 3: Important Safeguards
2 year warranty (1 year retail • 1 year extended upon online registration of product • visit www.russellhobbs.co.za) *Safe for all ironable fabrics **Vs Russell Hobbs Standard Ceramic IMPORTANT SAFEGUARDS When using any electrical appliance, basic safety precautions should always be followed including the following: 1. - Page 4 7. Children should be supervised to ensure that they do not play with the appliance. 8. Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid an electrical hazard.
- Page 5 30. Deposits or minerals in the water supply will generate scale and block the steam holes in the soleplate. It is advisable to use distilled water when filling your iron. Do not use chemically distilled water. 31. Leave the iron upright to cool down fully before cleaning and storing away. 32.
-
Page 6: Parts Diagram
PARTS DIAGRAM PARTS DIAGRAM 1. Steam control 5. Soleplate 2. Swivel Cord 6. Spray nozzle 3. SmartLight Indicator 7. Cover 4. Heel 8. Water inlet... -
Page 7: Before First Use
OPERATING INSTRUCTIONS BEFORE FIRST USE Remove any protective films or stickers from the soleplate and the iron’s body. Wipe the soleplate with a dry soft cloth. Unwind and straighten the power cord. Fill the iron as described in the section “How to Fill the Water Tank”. Connect the appliance to a suitable mains power supply outlet. - Page 8 example linen, cotton, polyester, silk, wool, viscose and rayon. Figure 1. Fabrics with this symbol are not ironable (figure 2). These fabrics include synthetic fabrics such as Spandex or elastane, Spandex-mixed fabrics and polyolefins (e.g. polypropylene), as well as prints on garments.
-
Page 9: How To Fill The Water Tank
Example: Ironing a shirt 1. Start ironing the time-consuming parts such as collar, cuffs and sleeves. 2. Next, iron the bigger parts like the front and back. By doing this, you prevent wrinkling the bigger parts when you are busy ironing the time-consuming ones. 3. -
Page 10: Dry Ironing
NOTE: When using the water spray function, ensure that there is enough water in the water tank. You may have to pump the spray button several times during first use in order to start the spraying function. DRY IRONING This function irons without the use of steam. 1. -
Page 11: Burst Of Steam In Vertical Position
BURST OF STEAM This function works well for tough wrinkles and heavy fabrics. By pressing the burst of steam button, an intense burst of steam is emitted from the soleplate, enhancing the distribution of steam into every part of the garment. This can be very useful when removing stubborn creases. This function can be used once the iron has reached maximum temperature –... - Page 12 MAX position. Do not put vinegar or other descaling agents in the water tank. 4. Place the iron on a stable surface in an upright standing position. 5. Connect the iron to mains supply outlet. 6. Allow the iron to heat up. The SmartLight will glow to indicate that the iron is heating up. 7.
-
Page 13: Cleaning And Maintenance
CLEANING AND MAINTENANCE • Regularly rinse the water tank with water. Empty the water tank after you have rinsed it. • After using, lift the iron with the water inlet filling hole downwards to empty the remaining water from the water tank into the sink. •... -
Page 14: Troubleshooting
• Never store the appliance while it is still wet or dirty. • Wind the power cord around the cord storage area and fix it with the cord clip. Put the power cord below the CordFix indicator to ensure that the mains cord does not touch the soleplate during storage. -
Page 15: Servicing The Appliance
The iron is not hot enough. Wait until the SmartLight has turned off – the iron is now ready. Leaking water from soleplate. There is still not enough heat being Use the steam button only produced. after the SmartLight has turned off. -
Page 16: Changing The Plug
• A reason is provided for why it is being returned. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent, in order to avoid any hazard. If service becomes necessary within the warranty period, the appliance should be returned to an approved Home of Living Brands (Pty) Limited service centre. -
Page 17: Year Warranty
PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. 2 YEAR WARRANTY 1 year retail ⵏ 1 year extended warranty upon registration* visit www.russellhobbs.co.za W A R R A N T Y AND EXTENDED WARRANTY 1.
Need help?
Do you have a question about the 25090ZA and is the answer not in the manual?
Questions and answers